MMX 32 VGA A

Technische Daten

MMX 32 VGA A Series
Video
Routing	3 x 2 matrix
Gain	Unity
Bandwidth	300 MHz (-3 dB), fully loaded 0 - 10 MHz: No more than +0.1 dB to -0.1 dB 0 - 130 MHz: No more than +2 dB to -0.1 dB
Crosstalk	-55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed	200 ns (max.)
Video input — MMX 32 VGA A, MMX 32 VGA MTP transmitter
Number/signal type	3 RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
Connectors	3 female 15-pin HD
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: -0.5 V to 2.0 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 145 kHz
Vertical frequency	30 Hz to 170 Hz
Return loss	<-42 dB @ 5 MHz
DC offset (max. allowable)	4.0 V
Video output — MMX 32 VGA A, MMX 32 VGA MTP receivers
Number/signal type	2 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-or tri-level sync), S-video, or composite video
Connectors
MMX 32 VGA A	1 female 15-pin HD 5 female BNC
MMX 32 VGA MTP receivers	1 female 15-pin HD 1 female RJ-45 (for proprietary analog signals to be received by MTP R 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ)
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.3 V to 2.0 Vp-p
Impedance	75 ohms
Return loss	<-30 dB @ 5 MHz
DC offset
MMX 32 VGA A	±5 mV maximum with input at 0 offset
MMX 32 VGA MTP receivers	<±20 mV with input at 0 offset
Sync
Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB
Input level	TTL: 2.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level	TTL: 4 V to 5 Vp-p, unterminated
Input impedance	510 ohms
Output impedance	75 ohms
Max. input voltage	5 Vp-p
Max. propagation delay	30 ns
Max. rise/fall time	4.2 ns
Polarity
MMX 32 VGA A	Positive or negative (follows input)
MMX 32 VGA MTP receivers	Positive or negative (selectable at receiver)
Audio
Routing	3 x 2 stereo matrix
Gain
MMX 32 VGA A
Output 1	Unbalanced output: 0 dB
Output 2	Unbalanced output: 0 dB; balanced output: +6 dB
MMX 32 VGA MTP
Output 1 (local output)	Unbalanced output: 0 dB
Output 2a (CAT 5 receiver)	Unbalanced output: +0 dB; balanced output: +6 dB
Output 2b	Unbalanced output: +0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise
MMX 32 VGA A	0.03% @ 1 kHz, 0.3% @ 20 kHz nominal level
MMX 32 VGA MTP	0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
Crosstalk
MMX 32 VGA A	<-80 dB @ 1 kHz, fully loaded
MMX 32 VGA MTP	<-76 dB @ 1 kHz, fully loaded
Stereo channel separation
MMX 32 VGA A	>-90 dB @ 1 kHz
MMX 32 VGA MTP	>-76 dB @ 1 kHz
CMRR	>-75 dB @ 20 Hz to 20 kHz
Audio input — MMX 32 VGA A, MMX 32 VGA MTP transmitter
Number/signal type	3 stereo, PC level, unbalanced
Connectors	(3) 3.5 mm mini stereo jacks
Impedance
MMX 32 VGA A	25k ohms balanced/unbalanced, DC coupled
MMX 32 VGA MTP transmitter	>3k ohms, balanced/unbalanced AC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+8.5 dBu, (unbalanced) at 1%THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — MMX 32 VGA A, MMX 32 VGA MTP receivers
Number/signal type
MMX 32 VGA A	2 stereo, balanced/unbalanced
MMX 32 VGA MTP receivers	2 stereo, balanced/unbalanced, PC level 1 summed stereo-to-mono on RJ-45
Connectors
MMX 32 VGA A	(1) 3.5 mm mini stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole
MMX 32 VGA MTP receivers	(1) 3.5 mm mini-stereo audio jack (unbalanced) (1) 3.5 mm captive screw connector, 5 pole (1) RJ-45
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Maximum level (Hi-Z)
MMX 32 VGA A	Program audio: >+21 dBu, balanced or unbalanced at 1% THD+N
MMX 32 VGA MTP receivers, output 2	>+17 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm)
MMX 32 VGA A	Program audio: >+14 dBm, balanced or unbalanced at 1% THD+N
MMX 32 VGA MTP receivers, output 2	>+14 dBm, balanced or unbalanced at 1% THD+N
Control/remote — switcher
Serial control port
MMX 32 VGA A	RS-232, female 9-pin D connector
MMX 32 VGA MTP	RS-232, 3.5 mm captive screw connector, 3 pole
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations
MMX 32 VGA A	2 = TX, 3 = RX, 5 = GND
MMX 32 VGA MTP	1 = TX, 2 = RX, 3 = GND
Contact closure
MMX 32 VGA A	1 female 9-pin D connector (also used as the serial control port)
MMX 32 VGA MTP	(2) 3.5 mm captive screw connectors, 5 pole
Contact closure pin configurations
MMX 32 VGA A	Output 1: 1= input 1, 4 = input 2, 6 = input 3, 5 = GND Output 2: 7= input 1, 8 = input 2, 9 = input 3, 5 = GND
MMX 32 VGA MTP	Output 1: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC Output 2: 1= input 1, 2 = input 2, 3 = input 3, 4 = GND, 5 = 5 VDC
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
General
External power supply	100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulated
Power input requirements	12 VDC, 0.7 A
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions
MMX 32 VGA A	1.75" H x 8.75" W x 3.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 7.6 cm D (Depth excludes connectors.)
MMX 32 VGA MTP	1.75" H x 8.75" W x 6.0" D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 15.24 cm D (Depth excludes connectors.)
Product weight
MMX 32 VGA A	2.5 lbs (1.1 kg)
MMX 32 VGA MTP	2.5 lbs (1.1 kg) (The twisted pair receiver is sold and shipped separately.)
Shipping weight	5 lbs (2.3 kg) per MMX 32 VGA A or per MMX 32 VGA MTP transmitter
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(7.6-113009-D12)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-565-01	7,6 cm	19,1 cm	26,7 cm	1,04 kg