MLC Plus 84 D

Technische Daten

MLC Plus 84 D
Memory
SDRAM	512 MB
Flash	512 MB
Software and control options
Software	Extron Global Configurator Plus and Professional for Windows®
Control options	GlobalViewer®, Extron Control
Ethernet control
Network interface controllers (NICs)	1
Connector	1 female RJ-45 connector
Data rate	10/100/1000Base-T, half/full duplex with autodetect
Protocols	DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1
Serial control
Quantity/type	2 bidirectional RS-232
Connectors	(2) 3.5 mm captive screw connectors, 3 pole
Baud rate and protocol	300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity
NOTE     These ports support software flow control. The default is no flow control.
Pin configurations
Serial, 3-pole captive screw	Pin 1 = Tx, 2 = Rx, 3 = Gnd
Digital input control
Quantity/type	1 digital input
Connectors	(1) 3.5 mm captive screw connector, 2 pole
Digital input
Input voltage range	0 to 24 VDC, clamped at +30 VDC
Input impedance	17.5k ohms
Programmable pullup	1k ohms to +5 VDC
Threshold low to high	>2.8 VDC
Threshold high to low	<2.0 VDC
Pin configurations	1 = digital input, 2 = Gnd
IR control
Quantity/type	1 TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
Connectors	(1) 3.5 mm captive screw connector, 2-pole
Pin configurations	Pin 1 = signal, 2 = Gnd
IR output carrier frequency	30 kHz to 300 kHz
Relay control
Quantity/type	2 normally open relays
Relay control connectors	(1) 3.5 mm captive screw connector, 3 pole
Relay control contact rating	24 VDC, 1 A
Volume control
Quantity/type	1 volume control (compatible with select Extron amplifiers)
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Pin configuration	Pin 1 = ?10 VDC reference voltage input, pin 2 = 0 to +10 VDC control voltage output, pin 3 = Gnd
Control voltage output range	0 to +10 VDC (±0.2 volts), adjustable
General
Power supply	Not included
Power input requirements	12 VDC, 1 A, 12 watts, max. Or power over Ethernet (PoE) (complies with PoE 802.3af, class 3)
Power consumption
Device	3.1 watts, 12 VDC
Device and power supply	4.1 watts, 100-240 VAC, 50-60 Hz
Device and PoE injector	7.3 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation
Device	10.5 BTU/hr
Device and power supply	13.7 BTU/hr
Device and PoE injector	24.9 BTU/hr
Mounting
Rack mount	No
Furniture or wall mount	Yes
Enclosure type	Plastic faceplate and high-impact plastic rear enclosure
Enclosure dimensions
Faceplate	Fits the openings in a 2 gang decorator-style wallplate.
Device	2.8" H* x 3.6" W x 1.6" D (7.1 cm H* x 9.1 cm W x 3.9 cm D) (Depth excludes buttons. Fits most 2 gang US boxes or mud rings. Allow at least 1.8" [4.6 cm] depth in the wall or furniture.) *Overall height is 4.1" (10.4 cm) including mounting tabs.
Product weight	0.4 lbs (0.2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE
Accessibility	Complies with the appropriate requirements of Section 508 of the Rehabilitation Act (29 U.S.C. 794d).
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(3934-D8-040717)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1194-03	10,2 cm	14,6 cm	14,0 cm	0,37 kg