TLS 525M

Technische Daten

TLP Pro 525M Series and TLS 525M
Display
Screen type	TFT Active matrix color LCD
Size	5" (12.7 cm), measured diagonally
Resolution	800x480 (WVGA)
Pixel density	186.6 PPI
Aspect ratio	5:3
Color depth	24 bit, 16.7 million colors
Transparency	8 bit
Brightness	850 nits (cd/m2)
Contrast	700:1
Backlight	LED
Viewing angle	±70° horizontal, ±70° vertical
Touch screen	Capacitive
Storage
SDRAM	2 GB
Flash	4 GB
Ethernet
Connectors	1 female RJ-45 connector
Data rate	10/100/1000Base-T, half/full duplex with autodetect
Protocols	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level = autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Software
TLP Pro 525M
Configuration software	Global Configurator Plus and Professional, GUI Designer
Programming software	Global Scripter
Control apps	Extron Control, iGVE
Resource management software	GlobalViewer Enterprise, iGVE
Utilities	Toolbelt, Embedded web page
TLS 525M
Configuration software	Room Agent
Sensors
Motion sensor	On/off
Light sensor	Auto/manual
USB
Quantity/type	1 high-speed USB 2.0
Connectors	1 Micro-B receptacle
Standards	USB 2.0, USB 1.1, USB 1.0 compatible
Max. data rates	Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
Digital input
Quantity/type	1 digital input (configurable)
Connectors	(1) 3.5 mm captive screw connector, 2 pole
Digital inputs
Input voltage range	0 to 24 VDC, clamped at +30 VDC
Input impedance	?10k ohms
Programmable pullup	1k ohms to +5 VDC
Threshold low to high	2.8 VDC
Threshold high to low	2.0 VDC
Pin configuration	1 = Digital input, 1 = Gnd
Audio output
Speaker output	1 mono, 89 dB Max. SPL @ 0.1 m
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	Up to 192 kHz
Audio channels	Mono or stereo
General
Power supply	Not included
Power input requirements	Power over Ethernet (PoE 802.3af, class 3)
Power consumption — Power injector (XTP PI 100)
Device	6.5 watts
Device and power injector	9.3 watts
Auxiliary power output
USB	5 VDC, 275 mA
Temperature/humidity	Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on back
Thermal dissipation — Power injector (XTP PI 100)
Device	17.3 BTU/hr
Device and power injector	26.9 BTU/hr
Mounting	Wall, furniture, glass, or rack
Enclosure type	Plastic
Enclosure dimensions	4.03" H x 6.08" W x 1.22" D (102 mm H x 154 mm W x 31 mm D) Touchpanel projects 0.97" (25 mm) from the mounting surface
Product weight	0.80 lbs (0.36 kg)
Regulatory compliance	CE, C-tick, c-UL,FCC Class B, ICES, RoHS, UL, VCCI, WEEE
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
NOTE     Shipping dimensions and weights are available at www.extron.com.
(4395-D3)