Annotator 300

Technische Daten

Annotator 300
Video input
Number/signal type	1 RGB, RGBcvS, component (interlaced, progressive, HD), S-video, composite video 1 HDMI (HDCP compliant) 1 DisplayPort (HDCP compliant)
Connectors	1 female 15-pin HD 1 female HDMI 1 female DisplayPort
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 100 kHz
Vertical frequency	24 Hz to 75 Hz
Resolution range
VGA and HDMI	640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2k
DisplayPort	640x480 to 1600x1200 and 2560x1600* 480p, 576p, 720p, 1080i, 1080p, and 2k *reduced blanking
Return loss	<-30 dB @ 5 MHz
DC offset (max. allowable)	0.5 V
Standards	DVI 1.0, HDMI, DisplayPort 1.1a, HDCP
Video processing
Decoder	12 bit digital (3D-adaptive comb filter)
Analog sampling	12 bits per color; 13.5 MHz standard (video), 170 MHz standard (RGB)
HDMI pixel data bit depth	8, 10, or 12 bits per channel; 165 MHz pixel clock
Display Port pixel data bit depth	8, 10, or 12 bits per channel; 270 MHz pixel clock
Colors	1 billion, (10 bit processing)
Video output
Number/signal type	2 HDMI (HDCP compliant) 1 DTP (HDCP compliant)
Connectors	2 female HDMI 1 female RJ-45 connector
Digital bit depth	8 or 10 bit, automatic
Vertical frequency	23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, 60 Hz
Scaled resolution	640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008,, 1600x12008, 1680x10508, 1920x12008 HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
	1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz
Interconnection between Annotator 300 and DTP/HDBT receiver
Termination standard	TIA/EIA T568B
Signal transmission distance
1080p @ 60 Hz	Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (shielded twisted pair)
NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
Audio input
Number/signal type	1 embedded digital audio from HDMI 1 embedded digital audio from DisplayPort
Connectors	1 female HDMI 1 female DisplayPort
Audio output
Number/signal type	2 embedded digital audio on HDMI 1 DTP 330 (embedded digital and remote balanced/unbalanced analog) or HDBaseT (embedded digital)
Connectors	2 female HDMI 1 RJ-45
Sync
Input type	RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
Input standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Input impedance	Horizontal: 75 ohms Vertical: 510 ohms
Communication — signal processor
Serial control port	1 bidirectional RS-232, 3-pin captive screw connector
Baud rate and protocol	9600, 8 data bits, 1 stop bit, no parity (default)
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
Contact closure	1 rear panel 3.5 mm captive screw connector, 3 pole
Contact closure pin configurations	Pin 1 = input 1, 2 = input 2, 3 = input 3
USB control port	1 female mini USB on front panel
USB standards	USB 2.0, high speed
Ethernet control port	1 RJ-45 female connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
Ethernet protocol	ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet
Ethernet default settings	Link speed and duplex level = autodetected IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Gateway = 0.0.0.0 DHCP = off
Web server	Up to 200 simultaneous sessions 40 MB nonvolatile user memory
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over DTP)
NOTE     Protocol is mirrored between the connected DTP 330 endpoint and the “Over DTP” port on Annotator 300. Signals from a control device pass into the Annotator 300 “Over DTP” port, is embedded with the DTP signal, and sent to individual DTP 330 Rx endpoint for control of a remote sink device. The “Over DTP” port is simply a pass-through connection to a DTP endpoint. There is no RS-232 or IR insertion from any Annotator 300 control port to the “Over DTP” port.
Serial control pass-through ports
Annotator 300 output/DTP Rx	RS-232 via (1) 3.5 mm, 5 pole captive screw connector (shared with IR port)
Baud rates	300 to 38400
Protocol	8 or 7 data bits 1 or 2 stop bits no parity (default) even or odd parity
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
IR pass-through control ports	TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
Annotator 300 output/DTP Rx	(1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port)
IR control pin configuration	3 = Gnd 4 = IR Tx, 5 = IR Rx
Communication — annotation
Number/signal type	32 USB devices (via hubs)
Connectors	3 USB type A connectors (2 on rear and 1 on front)
USB standards	USB 2.0, USB 1.1, USB 1.0 compatible
USB data rates	Low speed (1.5 Mbps), full speed (12 Mbps)
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption	37 watts
Auxiliary power output
USB	5 VDC, 500 mA on each USB connector
DTP output	Supports one endpoint (one DTP Rx)
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Fan, air flows from right to left (as viewed from the front panel)
Thermal dissipation	81.4 BTU/hr
Mounting
Rack mount	Yes, with pre-installed brackets.
Furniture mount	Yes, with optional under-desk or through-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.5" W x 9.5" D  (1U high, full rack wide) (4.4 cm H x 44.5 cm W x 24.1 cm D) (Depth excludes connectors and knobs.)
Product weight	5.4 lbs (2.4 kg)
Shipping weight	7 lbs (4 kg)
DIM weight	8 lbs (4 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-040914-D4)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1316-01	11,4 cm	54,6 cm	36,2 cm	3,22 kg