JMP 9600

Technische Daten

JMP 9600 Series
Content/file format
File types	MXF-wrapped JPEG 2000 in DCP (Digital Cinema Package, unencrypted)
Video formats
JMP 9600 HD models	1280x720p5,6,7,8*, 1920x1080i2,3 1 = at 24 Hz, 2 = at 25 Hz, 3 = at 29.97 Hz, 4 = at 30 Hz, 5 = at 48 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz (*at 4:2:2 only)
JMP 9600 2K models	1280x720p5,6,7,8 1920x1080i2,3,4, 1920x1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 24 Hz, 2 = at 25 Hz, 3 = at 29.97 Hz, 4 = at 30 Hz, 5 = at 48 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz
Audio formats	16, 20, or 24 bits, 48 kHz broadcast WAV
NOTE     1080p signals (1920 and 2048) at rates of 48 Hz and above are dual link HD-SDI only.
Video processing
Processing	8, 10, or 12 bits per color channel
Data rates	Playback at up to 250 Mbps (125 Mbps per video channel in 2 channel mode)
Standards	ISO/IEC 15444-1 JPEG 2000, 32x32 codeblock
Video output
Number/signal type	1 dual link HD-SDI in 4:4:4 or 2 single link HD-SDI in 4:2:2 and 2 DVI or RGBHV in 4:2:2
Connectors	2 female BNC 2 female DVI-I
Nominal level	0.7 Vp-p for RGB
Minimum/maximum levels	0.0 V to 1.0 Vp-p for RGB
Impedance	75 ohms for RGB
Resolution	Follows input file format
Standards	Analog RGB, Y Pr Pb output: SMPTE 274M, SMPTE 296M DVI output: SMPTE 274M, SMPTE 296M HD-SDI output: SMPTE 292M (single link), SMPTE 372M (dual link)
Frame rate	Follows the file format.
Player sync
External sync in (genlock)	1 Vp-p, bi-level or tri-level
Genlock connectors	1 female BNC (genlock in, black burst) 2 female 6-pin mini DIN (LOCK proprietary genlock in and out, for connection to other JMP 9600 units)
Time code
Signal level	Input impedance: 600 ohms Input level: >100 mVp-p Output level: 1 Vp-p
Rates
JMP 9600 HD models	1 SMPTE, EBU, film output on a female RCA connector (tip-sleeve)
JMP 9600 2K models	2 SMPTE, EBU, film (input and output) on a pair of female RCA connectors (tip-sleeve)
Sync — analog video outputs
Output type	For analog output: RGBHV
Output level	2.75 V to 3.3 Vp-p, unterminated for RGBHV
Output impedance	RGBHV: 75 ohms
Output polarity	H negative, V negative
Audio processing
Processing	24 bit, 48 kHz sampling
Digital audio output
Number/signal type	8 AES/EBU (16 channels, unbalanced, uncompressed)
Connectors	8 female BNC
Impedance	75 ohms
Nominal level	0.5 V to 1.5 Vp-p
Attenuation range per channel	0 to -144 dB
Control — host ports — JPEG video player
Serial host control ports	2 bidirectional RS-232, female 9-pin D connectors: 1 for control, 1 unused
Baud rate and protocol	300 to 115200 baud (115200 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), or even or odd parity
Serial control pin configuration	2 = Tx, 3 = Rx, 5 = GND
Ethernet host port	2 female RJ-45
Ethernet data rate	10/100/1000Base-T, half/full duplex with autodetect
Ethernet protocol	ICMP (ping), IP, TCP, DHCP, HTTP, Telnet, FTP
Ethernet default settings	IP address = 192.168.254.254 Subnet mask = 255.255.0.0 Default gateway = 0.0.0.0 DHCP = off
Storage
JMP 9600 HD, JMP 9600 2K
Hard drives	(2) 500 GB hard drives, RAID 0
JMP 9600 HD 128, JMP 9600 2K 128
Solid state drives	(2) 64 GB solid state drives, RAID 0
Program control	MSVPP command set Microsoft® Internet Explorer®, Apple® Safari®, Mozilla® Firefox®, Telnet
Software encoder	J2KENC and J2KENC-PRO
Digital I/O control
Number/type	4 digital inputs 4 relay outputs (2) 12 VDC outputs
Connectors
Digital inputs	(2) 3.5 mm captive screw connectors, 4 pole
Relay outputs	(3) 3.5 mm captive screw connectors, 4 pole
Power	(1) 3.5 mm captive screw connector, 4 pole
Pin configurations
Digital inputs	Pins 1, 3, 5, 7 = positive; pins 2, 4, 6, 8 = negative
Relay outputs	Pins 1, 4, 7, 10 = closed; pins 2, 5, 8, 11 = GND; pins 3, 6, 9, 12 = open
Power	Pins 1, 2 = +12 VDC; pins 3, 4 = GND
Digital inputs
Input voltage range	5 to 24 VDC (with external current limiting resistor)
Input current range	5 to 20 mA
Digital output contact rating	1 A, 24 VDC, maximum
General
Power supply*	Internal Input: 100-240 VAC, 50-60 Hz *A redundant power supply is included.
Power consumption	70 watts
Temperature/humidity	Operating: +50 to +104 °F (10 to +40 °C) / 10% to 90%, noncondensing
Cooling	Fan. Air flows in from the front and out through the vents in the two sides, as viewed from front panel.
Thermal dissipation	239 BTU/hr
Mounting
Rack mount	Yes, with included brackets
Enclosure type	Metal
Enclosure dimensions	3.5" H x 17.0" W x 15.5" D (2U high, full rack wide) 8.9 cm H x 43.2 cm W x 39.4 cm D (Depth excludes connectors and handles. Width excludes rack ears. Width with rack ears is 19.0" [48.3 cm].)
Product weight	23 lbs (10.4 kg)
Shipping weight	28 lbs (13 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, NRTL
EMI/EMC	CE, FCC Class A
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-111411-D8)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1135-01	22,5 cm	52,5 cm	64,8 cm	14,29 kg
60-1135-02	21,6 cm	54,0 cm	54,3 cm	12,25 kg
60-1136-01	21,6 cm	54,6 cm	54,0 cm	12,47 kg
60-1136-02	20,3 cm	54,0 cm	54,6 cm	12,25 kg
26-669-04	1,3 cm	17,8 cm	30,5 cm	0,05 kg