SME 211

€ 2988.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

2 kg



  • Neu Videostreaming mit bis zu 1080p/60
  • Neu Bitraten von bis zu 25 Mbps
  • Neu Erweiterte Kodierungssteuerung
  • Verarbeitet hochauflösende HDMI-Signale sowie Audio mit Metadaten
  • Streaming mit zwei Auflösungen gleichzeitig mit unabhängiger Stream-Steuerung
  • Simultanes Unicast- und Multicast-Streaming
Modell Beschreibung der Version Teilenummer
SME 211 Kodierer für Medien-Streaming 60-1763-01

Technische Daten

Technische Daten

SME 211
Video input
    Number/signal type  1 HDMI digital video (HDCP content not supported)
    Connectors  1 female HDMI type A
    Horizontal frequency  15 kHz to 100 kHz
    Vertical frequency  24 Hz to 75 Hz
    Resolution range  480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 640x480 to 1920x1200*
?*reduced blanking
    Standards  DVI 1.0, HDMI 1.4a
    Format  RGB and YCbCr digital video
Video processing
    Digital sampling  8-, 10-, or 12-bits per channel, 165 MHz pixel clock (HDMI)
    Digital processing  4:2:2, 8-bits per color
    Compression  H.264/AVC (ITU H.264, ISO/IEC 14496-10) 4:2:0, 8-bit color
Encoding profiles: High, Main, Baseline;
Encoding levels: 4.1, 4.0, 3.2, 3.1, 3.0; configurable GOP
    Bit rate  200 kbps to 10 Mbps
    Bit rate control  Selectable (variable, constrained, or constant)
    Latency  130 msec* (encode), 600 msec* (encode/decode)
*Indicates minimum latency. Encoder, decoder, and network dependencies apply.
Video output
    Number/signal type  1 H.264/AVC digital video over Ethernet
1 HDMI digital video
    Connectors  1 female RJ-45 (streaming)
1 female HDMI type A
    Scaled resolution  HDMI output: 480p, 720p, 1080p, 512x288, 1024x768, 1280x1024
Stream: 480p, 720p, 1080p, 512x288, 1024x768, 1280x1024
    Frame rate  Up to 30 fps for all output rates
    Formats  H.264/AVC (Profile type: High, Main, Baseline. Profile level: 4.1, 4.0, 3.2, 3.1, 3.0)
    NOTE     Appropriate HDMI to DVI-D cables or adapters are required for DVI signal output.
Audio input
       Number/signal type  1 stereo (balanced or unbalanced)
       Connectors  (1) 3.5 mm captive screw connectors, 5-pole
       Number/signal type  1 stereo, digital de-embedded from HDMI
       Connectors  1 female HDMI type A
    Impedance  >10k ohms unbalanced, >20k ohms balanced
    Nominal level  +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), adjustable via input gain
    Maximum level  +18 dBu, (balanced or unbalanced)
    CMRR  >70 dB @ 20 Hz to 20 kHz
    Input gain adjustment  -18 dB to +24 dB, 0.1 dB steps, adjustable per input
Audio processing
    Sampling rate  16 bit, 48 kHz or 44.1 kHz sampling
    Compression  AAC-LC MPEG-4 (ISO/IEC 14496-3:2005)
    Bit rate  80 kbps to 320 kbps, stereo
Audio output — digital
    Number/signal type  1 stereo, HDMI (re-embedded audio)
1 AAC-LC digital audio over Ethernet
    Connector  1 female HDMI type A
1 female RJ-45
       USB configuration port  1 front panel female USB Mini-B
       Mouse and keyboard port  Connect via any USB ports on SME 211.
       USB standards  USB 1.1, USB 2.0, high/full/low speed hosts
    Serial control 
       Serial control port  1 bidirectional RS-232, rear panel 3.5 mm captive screw connector, 3-pole
       Host control  Host control (Extron SIS), bidirectional
       Protocols  Data bits: 7 or 8 (default)
Stop bits: 1 (default) or 2
Parity: odd, even, or no (default)
Flow control: no flow control (default)
       Baud rates  9600 (default), 19200, 38400, 57600, 115200
       Serial control pin configurations  1 = Tx, 2 = Rx, 3 = Gnd
    Ethernet control 
       Ethernet host port  1 female RJ-45
       Ethernet data rate  10/100/1000Base-T, half/full duplex with autodetect
       Maximum Transmission Unit  1000-1500 MTU, adjustable
          Streaming  Pull: RTP/RTCP (RFC 3550), RTSP (RFC 2326), Interleaved RTSP (RTP/RTSP), RTP/RTSP tunneled through HTTP unicast or multicast
Push: MPEG2-TS/UDP* (ISO/IEC 13818-1), MPEG2-TS/RTP* (RFC 2250, IPTV?ID-0087, ETSI TS 102 034), Direct RTP (RFC 3984), SAP (RFC2974), SDP (RFC4566), unicast or multicast, RTMP
          Transport  TCP, UDP, multicast IGMPv3 (RFC 3376) or unicast
          All supported  IGMPv3 (RFC 3376), IP, UDP, SSL, DHCP, HTTP, HTTPS, RTP, RTSP, SNMP V2 (RFC 1213), SAP (RFC2974), SDP (RFC4566), QoS (RFC 2474), NTPv4 (RFC 4330)
       Ethernet default settings  IP address =
Subnet mask =
Default gateway =
DHCP = off
    Program control  Extron Simple Instruction Set (SIS) Extron DataViewer, Microsoft® Internet Explorer®, Apple® Safari®*, Mozilla® Firefox®*, Google®* Chrome
(*Certain browser dependencies may apply.)
    NOTE     *Indicates that portions of the RFC and other standards may apply.
    Power supply  Internal
Input: 100-240 VAC, 50-60 Hz
    Power consumption  23 watts typical
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Fan, air flow front to rear
    Thermal dissipation  50 BTU/hr
       Rack mount  Yes, with optional rack shelf
    Enclosure type  Metal
    Enclosure dimensions  1.66" H x 8.68" W x 9.5" D (1U high, half rack wide)
(42 mm H x 221 mm W x 216 mm D)
(Depth excludes connectors.)
    Product weight  2.5 lbs (1.1 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance 
       Safety  CE, c-UL, UL
       EMI/EMC  CE, C-Tick, FCC Class A, ICES, VCCI
       NOTE     CE and FCC testing is conducted with STP (shielded, twisted pair) cable.
       Environmental  ?Complies with the appropriate requirements of RoHS and WEEE.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.