TLP Pro 725C

Technische Daten

TLP Pro 725C Series
Display
Screen type	TFT Active matrix color LCD
Size	7" (17.8 cm), measured diagonally
Resolution	1024x600 (WSVGA)
Pixel density	170 PPI
Aspect ratio	17:10
Color depth	24 bit, 16.7 million colors
Transparency	8 bit
Brightness	420 nits (cd/m2)
Contrast	700:1
Backlight	LED
Viewing angle	±75° horizontal, +70°/-75° vertical
Touch screen	Capacitive
Memory
RAM	2 GB
Storage	4 GB
Ethernet
Connectors	1 female RJ-45 connector
Data rate	10/100/1000Base-T, half/full duplex with autodetect
Protocols	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level: autodetected IP address = 192.168.254.251 Subnet mask = 255.255.255.0 Default gateway = 0.0.0.0 DHCP = off DNS = 127.0.0.1
Software
Configuration software	Global Configurator Plus and Professional, GUI Designer
Programming software	Global Scripter
Control apps	Extron Control, iGVE
Resource management software	GlobalViewer Enterprise, iGVE
Utilities	Toolbelt, Embedded web page
Sensors
Motion sensor	On/off
Light sensor	Auto/manual
Lid switch	Open/closed
USB
Quantity/type	1 high-speed USB 2.0 device
Connectors	1 USB type A connector
USB standards	USB 2.0, USB 1.1, USB 1.0 compatible
USB data rates	Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)
Audio output
Speaker output	1 mono, 89 dB Max. SPL @ 0.1 m
Frequency response	750 Hz to 20 kHz, ±5 dB
Playback format(s)
Container format	WAV (Microsoft RIFF)
Encoding	LPCM (uncompressed)
Bit depth	Unsigned 8-bit Signed 16-bit Signed 24-bit Signed 32-bit
Sampling rate	up to 192 kHz
Audio channels	mono or stereo
General
Power supply	Not included
Power input requirements	Power over Ethernet (PoE 802.3af, class 3)
Power consumption — Power injector (XTP PI 100)
Device	8.6 watts
Device and power injector	11.4 watts
Auxiliary power output
USB	5 VDC, 275 mA
Temperature/humidity	Storage: -4 to +140 °F (-20 to +60°C) / 5% to 90%, noncondensing Operating: +32 to +104 °F (0 to +40 °C) / 20% to 90%, noncondensing
Cooling	Convection
Thermal dissipation — Power injector (XTP PI 100)
Device	24.5 BTU/hr
Device and power injector	34.0 BTU/hr
Mounting	Table mount
Enclosure type	Metal
Enclosure dimensions
ATTENTION     Use the appropriate metal Extron routing template or refer to the surface cutout dimensions here before cutting a hole in the furniture or other surface. Pay special attention to the direction the unit will face; the unit's connector access side is underlined. Extron is not responsible for miscut mounting holes.
Top plate (outer rim)	9.44" W x 8.29" D  (240 mm W x 211 mm D)
Surface cutout (inside rim)	8.90 +0.00/-0.02" W x 7.10 +0.00/-0.02" D (226 +0.0/-0.5 mm W x 180 +0.0/-0.05 mm D)
Box (under surface)	4.68" H x 12.71" W (front/rear of unit) x 7.00" D with clamps (119 mm H x 323 mm W x 178 mm D with clamps)
Product weight	5.85 lbs (2.65 kg)
Regulatory compliance	CE, C-tick, c-UL,FCC Class B, ICES, RoHS, UL, VCCI, WEEE
Product warranty	3 years parts and labor; touchpanel display and overlay components are covered for 1 year
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
NOTE     Shipping dimensions and weights are available at www.extron.com.
(4328-D2)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1564-02	26,7 cm	31,4 cm	28,9 cm	3,4 kg
60-1564-12	26,7 cm	31,4 cm	28,9 cm	3,4 kg