MTP 1500RL 15HD A & MTP 1500RL 15HD A SEQ

Technische Daten

MTP 1500RL 15HD Series
Video
Gain	Unity
Number/signal type	1 set of proprietary analog signals
Connectors	1 female RJ-45
Video input — see MTP Series transmitters specifications
Video output — receivers
Number/signal type	1 set of proprietary analog signals 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi- or tri-level sync), S-video, or composite video
Connectors	1 female RJ-45 1 female 15-pin HD
Nominal level	1 V p-p for Y of component video and S-video, and for composite video 0.7 V p-p for RGB and for R-Y and B-Y of component video 0.3 V p-p for C of S-video
Minimum/maximum levels	0.3 V to 1.45 V p-p
Impedance	75 ohms
Return loss	<-30 dB @ 5 MHz
DC offset	<±35 mV with input at 0 offset
Skew compensation	62 ns
Maximum resolution	Up to 1600x1200 and 1080p at 1500'; 1920x1200 and 2048x1080 at 1200'
Sync
Output type	RGBHV, RGBS, RGsB, RsGsBs
Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level	0.3 Vp-p for component video (bi-level sync) 0.6 Vp-p for component video (tri-level sync) TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBS
Output impedance	110 ohms
Polarity	Positive or negative (switch-selectable)
Audio — MTP 1500RL 15HD A SEQ
Number/signal type	1 set of proprietary analog signals
Connectors	1 female RJ-45
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±1 dB
THD + Noise	0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level
S/N	>70 dB at maximum output (unweighted)
Stereo channel separation	>60 dB @ 1 kHz
CMRR	>43 dB @ 20 Hz to 20 kHz
Audio input — See MTP Series transmitters specifications
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — MTP 1500RL 15HD A SEQ
Number/signal type	2 mono, balanced/unbalanced
Connectors	(1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±1 dB channel to channel
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level	+18 dBu, unbalanced at 1% THD+N
Control/remote — external device (pass-through, unidirectional or bidirectional) — RS model only
Serial control ports
Input/output	1 set of proprietary signals on a female RJ-45 jack
Output/input	RS-232 via (1) 3.5 mm, 3 pole captive screw connector
Baud rates	Up to 38400 bps at up to 1000' (300 m)
Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
NOTE     Protocol is mirrored between the transmitter and the receiver.
Serial control pin configuration	Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND
General
Recommended cable type	CAT 5/5e/6 (shielded or unshielded)
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power input requirements	12 VDC, 1.0 A max.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents sides to top
Mounting
Rack mount	Yes, with optional 1U rack shelf
Wall mount	Yes, with optional wall mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	1 lb (0.5 kg)
Shipping weight	2 lbs (1 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-100511-D11)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-959-02	10,5 cm	34,0 cm	27,6 cm	1,24 kg