MTP RL 15HD RS und MTP RL 15HD RS SEQ
EUR
648.00
€ 648.00
Hersteller
Extron
Art.Nr.
60-1063-01
EAN
60-1063-01
Produktbeschreibung
Hauptmerkmale
- Empfängt hochauflösende Video- und RS-232-Signale über ein einzelnes CAT 5-Kabel von 185 m oder länger
- Unterstützt RGBHV, RGBS, RGsB, RsGsBs, Komponenten-Video, S-Video und FBAS-Video
- Kompatibel mit HDTV-Komponenten-Video, Bi-level- und Tri-level-Synchronisation
- Separate Regler für variable Pegel- und Peaking-Einstellungen
- Gepufferter MTP-Ausgang zur Kaskadierung von bis zu acht Empfängern
- Einzeln einstellbarer Laufzeitdifferenz-Ausgleich für jede Farbe - nur MTP RL 15HD RS SEQ
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
MTP RL 15HD RS | Empfänger | 60-1063-01 | |
MTP RL 15HD RS SEQ | Empfänger mit Laufzeitdifferenz-Equalizer | 60-1063-02 |
Technische Daten
Technische Daten
-
MTP 15HD RS Series Video Gain Unity Number/signal type MTP 4T 15HD RS 4 sets of proprietary analog signals All other models 1 set of proprietary analog signals Connectors MTP 4T 15HD RS 4 female RJ-45 MTP R 15HD RSA D 1 female RJ-45 on a pigtail All other models 1 female RJ-45 Video input and loop-through — transmitter (MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS) Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (with bi-level or tri-level sync), S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)Connectors 2 female 15-pin HD Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Horizontal frequency 15 kHz to 130 kHz Vertical frequency 30 Hz to 150 Hz Return loss <-30 dB @ 5 MHz DC offset (max. allowable) 250 mV Video output — receivers Number/signal type MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-/tri-level sync), S-video, or composite videoConnectors MTP R 15HD RSA D 1 female 15-pin HD All other receivers 1 female RJ-45
1 female 15-pin HDNominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Return loss <-30 dB @ 5 MHz DC offset <±20 mV with input at 0 offset Skew compensation 62 ns Maximum resolution MTP 1500RL 15HD models Up to 1600x1200 and 1080p at 1500'
Up to 1920x1200 and 2048x1080 at 1200'All other models Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'NOTE Refer to the user's manual for the maximum distances recommended for specific resolutions. Sync Input type (transmitter) RGBHV, RGBS, RGsB, RsGsBs Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs Standards NTSC 3.58, NTSC 4.43, PAL, SECAM Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated Output level (receivers) MTP 1500RL 15HD models 0.3 Vp-p for component video (bi-level sync)
0.6 Vp-p for component video (tri-level sync)
TTL: 4.0 V to 5.0 V p-p, unterminated for RGBHV, RGBSAll other models 4.0 V to 5.0 Vp-p, unterminated Input impedance MTP C7 models 573 ohms All other models 510 ohms Output impedance MTP C7 models 92 ohms ±8% (25 mA) All other models 110 ohms Polarity Transmitter Positive or negative (follows input polarity) Receivers Positive or negative (switch selectable) Control/remote — external device (pass-through, unidirectional or bidirectional) Serial control port input/output MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS RS-232 via (1) 3.5 mm, 3 pole captive screw connector MTP R 15HD RSA D, MTP C7 RL 15HD RS, MTP C7 RL 15HD RS SEQ 1 set of proprietary signals on a female RJ-45 jack Serial control port output/input MTP T 15HD RS, MTP C7 T 15HD RS, MTP 4T 15HD RS 1 set of proprietary signals on a female RJ-45 jack MTP R 15HD RSA D RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole All other receivers RS-232 via a 3.5 mm, 3 pole captive screw connector Baud rates MTP R 15HD RSA D, MTP 1500RL 15HD RS, MTP 1500RL 15HD RS SEQ Up to 38400 bps at up to 1000' (304.8 m) All other models Up to 38400 bps at up to 600' (183 m) NOTE Higher data rates and distances are possible. Performance varies based on baud rate and cable length. Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, noneNOTE Protocol is mirrored between the transmitter and the receiver. Serial control pin configuration Captive screw connectors: 1 = TX, 2 = RX, 3 = GND General Recommended cable type Models other than C7 models CAT 5/5e/6 (shielded or unshielded) Required cable type MTP C7 15HD models Extron DTP26 or CAT 7 Power MTP 4T 15HD RS only: 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal External power supply All models except MTP 4T 15HD RS:
100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A, regulatedPower input requirements For models except MTP 4T 15HD RS. MTP 1500RL 15HD models 12 VDC, 1.0 A max. All other models 12 VDC, 0.5 A Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling MTP 1500RL 15HD models Convection, vents sides to top All other models Convection, no vents Mounting Rack mount MTP R 15HD RSA D No MTP 4T 15HD RS Yes, with included mounting kit All other models Yes, with optional 1U rack shelf Furniture mount MTP R 15HD RSA D Yes, using a standard electrical wall box or Decora® size mud ring MTP 1500RL 15HD models No All other models except MTP 4T 15HD RS Yes, with optional mini under-desk mounting kit Wall mount MTP 1500RL 15HD models Yes, with optional wall mounting kit Pole mount MTP R 15HD RSA D No MTP 1500RL 15HD models No All other models except MTP 4T 15HD RS Yes, with optional pole mounting kit Enclosure type Metal Enclosure dimensions MTP R 15HD RSA D Faceplate 2.6" H* x 1.3" W x 0.24" D
(6.6 cm H* x 3.3 cm W x 0.5 cm D)
*Overall height is 4.1" (10.4 cm) including mounting tabs.
(Fits the opening in a 1 gang, 4.4" H x 2.7" W Decora®-style wallplate. Depth excludes connectors.)Device 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)MTP 4T 15HD RS 1.7" H x 17.5" W x 8.5" D (1U high, full rack wide)
(4.3 cm H x 44.4 cm W x 21.6 cm D)
(Depth excludes connectors.)MTP 1500RL 15HD models 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)All other models 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)Product weight MTP 4T 15HD RS 6.0 lbs (2.7 kg) MTP 1500RL 15HD models 1 lb (0.5 kg) All other models 0.4 lbs (0.2 kg) Shipping weight MTP 4T 15HD RS 10 lbs (5 kg) All other models 2 lbs (1 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Product warranty 3 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (7.6-111909-D10) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1063-01 24,1 cm 18,1 cm 6,8 cm 0,76 kg 60-1063-02 24,1 cm 18,1 cm 6,8 cm 0,78 kg