MTP T 15HD A WM
EUR
542.40
€ 542.40
Hersteller
Extron
Art.Nr.
60-691-03
EAN
60-691-03
Produktbeschreibung
Hauptmerkmale
- Transmits high resolution video and summed mono audio signals over a single CAT 5-type cable
- Supports RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, and composite video
- Pre-peaking circuit for optimizing video signal on long cable runs
- Compatible with HDTV component video, bi-level or tri-level sync
- Mounts in a standard one-gang electrical box
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
MTP T 15HD A WM | One-Gang Wallplate - Black | 60-691-02 | |
MTP T 15HD A WM | One-Gang Wallplate - White | 60-691-03 |
Technische Daten
Technische Daten
-
MTP 15HD A Series Video Gain Unity Number/signal type 1 set of proprietary analog signals Connectors MTP R 15HD RSA D 1 female RJ-45 on a pigtail All other models 1 female RJ-45 Video input and loop through — transmitters Number/signal type MTP T 15HD A 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video
1 buffered RGBHV, RGBS, RGsB, RsGsBs local monitor loop through (includes ID bits)MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite video Connectors MTP T 15HD A 2 female 15-pin HD All other transmitters 1 female 15-pin HD Nominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Horizontal frequency 15 kHz to 130 kHz Vertical frequency 30 Hz to 150 Hz Return loss <-30 dB @ 5 MHz DC offset (max. allowable) 250 mV Video output — receivers (MTP RL 15HD A, MTP RL 15HD A SEQ, MTP R 15HD RSA D) Number/signal type MTP R 15HD RSA D 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, HD component video, component video, S-video, or composite video All other receivers 1 set of proprietary analog signals
1 analog RGBHV, RGBS, RGsB, RsGsBs, component video, S-video, or composite videoConnectors MTP R 15HD RSA D 1 female 15-pin HD All other receivers 1 female RJ-45
1 female 15-pin HDNominal level 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Return loss <-30 dB @ 5 MHz DC offset MTP R 15HD RSA D <±20 mV with input at 0 offset All other receivers <±35 mV with input at 0 offset Skew compensation 62 ns Maximum resolution Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'NOTE See the user guide for the maximum distances recommended for specific resolutions. Sync Input type (transmitters) RGBHV, RGBS, RGsB, RsGsBs Output type (receivers) RGBHV, RGBS, RGsB, RsGsBs Standards NTSC 3.58, NTSC 4.43, PAL, SECAM Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated Output level (receivers) 4.0 V to 5.0 Vp-p, unterminated Input impedance (transmitter) 573 ohms ±5% Output impedance (receivers) 110 ohms Max. input voltage (transmitter) 5.5 V p-p Polarity Transmitter Positive or negative (follows input polarity) Receivers Positive or negative (switch-selectable) Audio — all models Number/signal type 1 set of proprietary analog signals Connectors 1 female RJ-45 Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±1 dB THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level S/N >70 dB at maximum output (unweighted) Stereo channel separation >60 dB @ 1 kHz CMRR >43 dB @ 20 Hz to 20 kHz Audio input — transmitters Number/signal type 1 stereo, unbalanced Connectors (1) 3.5 mm mini stereo jack Impedance >10k ohms, unbalanced Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level +18 dBu, (unbalanced) at 1%THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output — MTP T 15HD A AAP, MTP T 15HD A D, MTP T 15HD A WM local stereo output Number/signal type 1 stereo, balanced/unbalanced Connectors (1) 3.5 mm direct insertion captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±1 dB channel to channel Maximum level (Hi-Z) >+23 dBu, balanced or unbalanced at 1% THD+N Maximum level (600 ohm) >+17 dBm, balanced or unbalanced at 1% THD+N Audio output — receivers Number/signal type MTP R 15HD RSA D 1 mono, balanced/unbalanced All other receivers 2 mono, balanced/unbalanced Connectors MTP R 15HD RSA D (1) 3.5 mm captive screw connector, 5 pole (uses 3 poles) All other receivers (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±1 dB channel to channel Nominal level +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level MTP R 15HD RSA D 14 dBm, unbalanced at 1% THD+N All other receivers +18 dBu, unbalanced at 1% THD+N Control/remote — external device (pass-through, unidirectional or bidirectional) — MTP R 15HD RSA D only Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack Serial control port output/input RS-232 via 3 poles of a 3.5 mm captive screw connector, 5 pole Baud rates Up to 38400 bps at up to 1000' (304.8 m) (Higher data rates and distances are possible. Performance varies based on baud rate and cable length.) Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, noneNOTE Protocol is mirrored between the transmitter and the receiver. Serial control pin configuration Captive screw connector: 1 = Tx, 2 = Rx, 3 = GND General Recommended cable type CAT 5/5e/6 (shielded or unshielded) Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower input requirements 12 VDC, 0.5 A Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Mounting Rack mount MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional rack shelf Furniture or wall mount MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional under-desk mounting kit MTP T 15HD A AAP Yes, with optional AAP mounting faceplates that have double space high AAP opening MTP T 15HD A D, MTP R 15HD RSA D Yes, in a decorator-style opening with a standard electrical wall box or standard 1-gang US size mud ring MTP T 15HD A WM Yes, in a 1-gang opening Pole mount MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ Yes, with optional pole mounting kit Enclosure type Metal Enclosure dimensions MTP T 15HD A, MTP RL 15HD A, MTP RL 15HD A SEQ 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
4.3 cm H x 10.9 cm W x 7.6 cm D
(Depth excludes connectors.)Faceplates MTP T 15HD A AAP 1.4" H x 3.5" W x 0.1" D (3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space high AAP plate)MTP T 15HD A D, MTP R 15HD RSA D 2.6" H* x 1.3" W x 0.1" D (6.6 cm H* x 3.3 cm W x 0.3 cm D)
(Fits the opening in a 1 gang, 4.4" H x 2.7" W decorator-style wallplate. Depth excludes connectors.)
*Overall height is 4.1" (10.4 cm) including mounting tabs.MTP T 15HD A WM 4.5" H x 2.8" W x 0.1" D (11.4 cm H x 7.1 cm W x 0.3 cm D) (1 gang) Device MTP R 15HD RSA D 2.75" H x 1.65" W x 1.3" D
(7.0 cm H x 4.2 cm W x 3.3 cm D)
(Depth excludes connectors.)Other AAP, D, and WM models 2.7" H x 1.4" W x 1.4" D (6.9 cm H x 3.6 cm W x 3.6 cm D)
(Depth excludes connectors.)Product weight 0.4 lbs (0.2 kg) Regulatory compliance CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4327-D18) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-691-02 6,2 cm 18,1 cm 24,1 cm 0,94 kg 60-691-03 6,2 cm 18,1 cm 24,1 cm 0,94 kg