PowerCage 1600
EUR
2664.00
€ 2664.00
Hersteller
Extron
Art.Nr.
60-978-01
EAN
60-978-01
Gewicht
9 kg
Produktbeschreibung
Hauptmerkmale
- Kann bis zu acht Doppel-Module aufnehmen
- Platzsparendes Design durch ein kompaktes, 3 HE hohes, rackmontierbares Gehäuse
- Modulares, vor Ort erweiterbares und bei laufendem Betrieb austauschbares Design
- Optionales redundantes Netzteil
- Im Betrieb austauschbare Netzteile
- Äußerst effektives Temperaturmanagement
Modell | Beschreibung der Version | Teilenummer | ||
---|---|---|---|---|
PowerCage 1600 Enclosure | 3 HE hohes Gehäuse mit 16 Einschüben | 60-978-01 | ||
PowerCage 1600 Power Supply | Optionales redundantes Netzteil | 70-1084-01 | ||
PowerCage 1600 Power Supply Kit | Optionales redundantes Netzteil | 70-784-01 | AUS DEM PROGRAMM GENOMMEN |
Technische Daten
Technische Daten
-
PowerCage™ 1600 System NOTE The PowerCage FOX AEX 104 board is not compatible with the Extron FOX 3G HD-SDI extender or the FOX 3G DVC signal converter. NOTE The PowerCage FOX DVI, PowerCage FOX VGA, PowerCage FOX HDMI, and PowerCage FOX SR HDMI boards are not compatible with the FOX 3G HD-SDI, FOX 3G DVC, or FOX AV models. NOTE The PowerCage FOX boards are available in singlemode or multimode versions. NOTE The PowerCage FOX boards are class 1 laser products. They meet the safety regulations of IEC-60825. Optical specifications — PowerCage FOX boards, interconnection between transmitter and receiver Number/type 1 singlemode or 1 multimode fiber optic input and output per FOX board, up to 8 double space boards per PowerCage enclosure NOTE For FOX HDMI boards: Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit HDMI video with HDCP content or return data for bidirectional control/communication. NOTE Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to return data for bidirectional control and communication. Connectors 2 bidirectional LC connectors per FOX board Operating distance Singlemode 30 km (18.75 miles) with singlemode (SM) cables with a SM board Multimode 300 m (985') with 62.5 µm OM1 multimode (MM) cable and a MM board
1 km (3280') with 50 µm OM2 multimode (MM) cable and a MM board
2 km (6561') with 50 µm OM3/OM4 2000 MHz bandwidth laser optimized MM cable and a MM boardNOTE Operating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Nominal peak wavelength 850 nm for multimode (MM), 1310 nm for singlemode (SM) Transmission power, singlemode or multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -18 dBm, typical Multimode -12 dBm, typical Optical loss budget Singlemode 13 dB, maximum Multimode 7 dB, maximum Maximum channel data rate PowerCage FOX AV boards 2.125 Gbps Other PowerCage FOX boards 4.25 Gbps Video — PowerCage FOX Tx/Rx VGA NOTE For PowerCage FOX VGA boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver. Signal type VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs Gain Unity Pixel data bit depth 8 bits per channel, 3 channels (R, G, B) Maximum resolution 640x480 to 1600x1200 or 480p,576p, 720p,1080i, 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled Video input — PowerCage FOX Tx VGA Number/signal type 1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs Connector 1 female 15-pin HD Nominal levels 0.7 Vp-p for RGB Minimum/maximum levels Analog: 0.3 V to 0.75 Vp-p with no offset, terminated Impedance 75 ohms Horizontal frequency 24 kHz to 100 kHz Vertical frequency 40 Hz to 120 Hz Return loss >40 dB @ 5 MHz Video output — PowerCage FOX Rx VGA Number/signal type With input from a FOXBOX Tx VGA or a FOX 500 Tx:
1 VGA-UXGA RGBHV, RGsB (follows input or can be set by user)
With input from a FOXBOX Tx VGA/YUV:
1 VGA-UXGA RGBHV, component video (bi- or tri-level YUV, 480p, 576p, 720p, 1080i, 1080p)Connector 1 female 15-pin HD Nominal levels 1 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component videoMinimum/maximum levels 0.3 V to 0.75 Vp-p, terminated Impedance 75 ohms Return loss >30 dB @ 5 MHz DC offset ±5 mV with input at 0 offset Video delay 1-2 frames Sync — PowerCage FOX Tx/Rx VGA Input type RGBHV, RGBS, RGsB, RsGsBs Output type RGBHV, RGsB (follows input or can be set by user) Input level 2.5 V to 5.0 Vp-p Output level TTL: 5.0 Vp-p, unterminated, on HV, for RGBHV, RGBS
0.3 Vp-p for component video (bi-level sync) or for Gs (SOG)
0.6 Vp-p for component video (tri-level sync)Input impedance 10k ohms Output impedance 75 ohms Polarity Positive or negative (follows input or can be set by user) Video — PowerCage FOX Tx DVI, PowerCage FOX Tx/Rx DVI Plus Resolution range PowerCage FOX Tx DVI 640x480 to 1600x1200 or 480p,576p, 720p,1080i, 1080p @ 60 Hz pixel for pixel; higher resolutions up to 1920x1200 @ 60 Hz, undersampled PowerCage FOX Tx/Rx DVI Plus 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i,
1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampledFormat RGB Standards DVI 1.0, HDMI Video input — PowerCage FOX Tx DVI, PowerCage FOX Tx DVI Plus Number/signal type 1 single link DVI-D (or HDMI*) Connector 1 female DVI-I NOTE *Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output. The PowerCage FOX DVI and DVI Plus boards can be used to distribute HDMI signals if you use a DVI-to-HDMI adapter. However, when using HDMI signals, these units do not transmit audio and CEC signals.
These boards do not support transmission of DVI signals with High-bandwidth Digital Content Protection (HDCP).Video output — PowerCage FOX Rx DVI Plus Number/signal type 1 single link DVI-D (or HDMI*) Connector 1 female DVI-I Nominal level 0.8 Vp-p Video delay 1-2 frames Video — PowerCage FOX 3G HD-SDI NOTE The PowerCage FOX 3G HD-SDI is a transceiver that can function as a transmitter or as a receiver. Two units are required for a transmitter-receiver system with one fiber optic cable linking the two units. Signal type HD-SDI, SDI, and 3G-SDI digital video signals Gain Unity Resolution 8 or 10 bits, automatic Data rates 270 Mbps, 1.485 Gbps, 2.970 Gbps Operation standards SMPTE 259M-C, SMPTE 292M, SMPTE 424M, ITU-R BT.601, ITU-R BT.1120 Auto data rate lock Yes Video input — PowerCage FOX 3G HD-SDI transmitter Number/signal type 1 single link SDI, HD-SDI, or 3G-SDI digital component video Connectors 1 female BNC Data rates 19 Mbps to 2.97 Gbps Nominal level 0.8 Vp-p Minimum/maximum levels 0.5 V to 1 Vp-p with no offset Impedance 75 ohms Return loss ?15 dB @ 5 MHz to 1.5 GHz
?10 dB @ 1.5 GHz to 3 GHzDC offset (max. allowable) 5 V Input coupling AC Input cable equalization Automatic for up to -30 dB of cable loss HD-SDI 120 m (400') using Extron RG6 cable
90 m (300') using Extron RG59 cableSDI 150 m (500') using Extron RG6 cable
120 m (400') using Extron RG59 cableNOTE The transmission distance varies depending on the signal resolution and on the type of cable, graphics card, and display used in the system. Video output — PowerCage FOX 3G HD-SDI receiver Number/signal type 2 single link SDI, HD-SDI, or 3G-SDI digital component video Connectors 2 female BNC Re-clocking Automatic for 270 Mbps, 1.485 Gbps, 2.97 Gbps, or bypassed for unrecognized rates Nominal level 0.8 Vp-p Minimum/maximum levels 0.5 V to 1.0 Vp-p Impedance 75 ohms Return loss >25 dB @ 100 MHz DC offset ±5 mV with input at 0 offset Video — PowerCage FOX Tx/Rx AV NOTE For PowerCage FOX AV boards, the analog video input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog video in the receiver. Gain Unity Standards Input NTSC 3.58, NTSC 4.43, PAL, SECAM, autodetected Output NTSC 3.58, PAL (follows vertical rate) Decoder type Adaptive 2D, digital comb filter Video input — PowerCage FOX Tx AV Number/signal type 1 component (Y, R-Y, B-Y), S-video, composite video Connectors 1 x 3 female BNC or 1 female 4-pin mini DIN for S-video Nominal levels 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for R-Y, B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset Impedance 75 ohms Return loss >30 dB for Y/VID, B-Y/C, R-Y @ 5 MHz Input coupling AC Video output — PowerCage FOX Rx AV Number/signal type 1 component (Y, R-Y, B-Y) video, S-video, composite video Connectors 1 x 3 female BNC or 1 female 4-pin mini DIN for S-video Nominal levels 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for R-Y, B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.5 Vp-p Impedance 75 ohms Return loss >40 dB @ 5 MHz DC offset +350 mV, maximum, with input at 0 offset Video delay 1-2 frames Video — PowerCage FOX Tx/Rx HDMI NOTE Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input and output. Maximum data rate 4.25 Gbps Maximum pixel clock 165 MHz Maximum resolution 640x480 up to 1920x1200 @ 60Hz, including 480p, 576p, 720p, 1080i,
1080p @ 60Hz, sampled pixel for pixel; higher resolution 2K (2048x1080) @ 60 Hz, undersampledFormats RGB and YCbCr digital video Standards DVI 1.0, HDMI, HDCP 1.1, CEA-861E Video input — PowerCage FOX Tx HDMI Number/signal type 1 single link HDMI Connectors 1 female 19-pin HDMI type A Video output — PowerCage FOX Rx HDMI Number/signal type 1 single link HDMI Connectors 1 female 19-pin HDMI type A Video processing — PowerCage FOX SR HDMI Digital sampling 24 bit, 8 bits per color, 165 MHz standard Colors 16.78 million Video output — PowerCage FOX SR HDMI NOTE Appropriate HDMI to DVI-D cables or adapters are required for DVI signal output. Number/signal type 1 single link HDMI (HDCP compliant) Connectors 1 female HDMI type A Nominal level 0.8 Vp-p Video delay 1-2 frames Scaled resolution 640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,81 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz, 9 = 75 Hz Video — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ Gain Unity Number/signal type 1 set of proprietary analog signals Connector 1 female RJ-45 Video input — PowerCage MTP T 15HD RSA Number/signal type 1 analog RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video Connector 1 female 15-pin HD Nominal levels 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Horizontal frequency 15 kHz to 130 kHz Vertical frequency 30 Hz to 150 Hz Return loss <-30 dB @ 5 MHz DC offset (max. allowable) 250 mV Video output — PowerCage MTP R 15HD RSA SEQ Number/signal type 1 analog VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, component video (YUVi or YUVp/HDTV), S-video, or composite video Connector 1 female 15-pin HD Nominal levels 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.45 Vp-p Impedance 75 ohms Return loss <-30 dB @ 5 MHz DC offset <±35 mV with input at 0 offset Skew compensation 62 ns Maximum resolution Up to 1920x1200 or 2048x1080 or 1080p at 300'
Up to 1024x768 at 600'NOTE Refer to the user guide for the maximum distances recommended for specific resolutions. Sync — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ Input/output type RGBHV, RGBS, RGsB, RsGsBs Standards NTSC 3.58, NTSC 4.43, PAL, SECAM Input level (transmitter) 3.5 V to 5.5 Vp-p, unterminated Output level (receiver) 4.0 V to 5.0 Vp-p, unterminated Input impedance (transmitter) 573 ohms ±5% Output impedance (receiver) 110 ohms Polarity Transmitter Positive or negative (follows input polarity) Receiver Positive or negative (switch-selectable) Video — PowerCage MTP T AV, PowerCage MTP R AV Gain Unity Differential phase error <1.0° at 3.58 MHz and 4.43 MHz Differential gain error <1.0% at 3.58 MHz and 4.43 MHz Video input — PowerCage MTP T AV Number/signal type 1 S-video or composite video Connectors 2 female BNC Nominal level 1 Vp-p for Y of S-video and for composite video
0.3 Vp-p for C of S-videoMinimum/maximum levels 0.3 V to 1.5 Vp-p with no offset Impedance 75 ohms Return loss <-30 dB, DC @ 10 MHz DC offset (max. allowable) 250 mV Video output — PowerCage MTP R AV Number/signal type 1 S-video or composite video Connectors 2 female BNC Nominal level 1 V p-p for Y of S-video and for composite video
0.3 V p-p for C of S-videoMinimum/maximum level 0.3 V to 1.5 Vp-p Impedance 75 ohms Return loss <-35 dB @ 5 MHz DC offset ±20 mV with input at 0 offset Sync — PowerCage MTP T AV, PowerCage MTP R AV Standards NTSC 3.58, NTSC 4.43, PAL, SECAM Audio — PowerCage FOX Tx/Rx VGA, PowerCage FOX Tx DVI, PowerCage FOX Tx/Rx DVI Plus, PowerCage FOX Tx/Rx AV, PowerCage FOX Tx/Rx HDMI, PowerCage FOX SR HDMI NOTE In PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. Gain Range Adjustable, -18 dB to +10 dB Default Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise VGA, DVI, HDMI, SR HDMI boards 0.10% @ 1 kHz at nominal level AV boards 0.15% @ 1 kHz at nominal level S/N >80 dB at maximum output (unweighted) CMRR 65 dB @ 20 Hz to 20 kHz Audio bits per sample 18 bits per channel, 2 channels (L, R) Sampling rate 48 kHz Audio — PowerCage FOX AEX 104 NOTE In PowerCage FOX boards, the analog audio signals are digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver. NOTE The PowerCage FOX AEX 104 board is not compatible with the Extron FOX 3G HD-SDI extender or the FOX 3G DVC signal converter. Gain Unbalanced output: -6 dB; balanced output (default): 0 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise 0.10% @ 1 kHz at nominal level S/N >80 dB at maximum output (unweighted) Audio bits per sample 18 bits per channel, 2 channels (L, R) Sampling rate 48 kHz Audio input — PowerCage FOX Tx VGA, PowerCage FOX Tx DVI, PowerCage FOX Tx DVI Plus, PowerCage FOX Tx AV, PowerCage FOX Tx HDMI Number/signal type HDMI boards 1 stereo, unbalanced or
2 mono, unbalancedVGA, DVI, DVI Plus, and AV boards 1 stereo, balanced/unbalanced or
2 mono, balanced/unbalancedConnectors HDMI boards (1) 3.5 mm mini stereo jack VGA, DVI, DVI Plus, and AV boards (1) 3.5 mm captive screw connector, 5 pole Impedance ?10k ohms unbalanced, ?20k ohms balanced Nominal level HDMI boards -10 dBV (316 mVrms) All other FOX boards +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level AV boards +17 dBV, unbalanced at 1% THD+N VGA, DVI, DVI Plus, and HDMI boards +8.9 dBV, unbalanced at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output — PowerCage FOX Rx VGA, PowerCage FOX Rx DVI Plus, PowerCage FOX Rx AV, PowerCage FOX Rx HDMI, PowerCage FOX SR HDMI, PowerCage FOX AEX 104 Number/signal type AEX 104 boards 4 stereo, balanced/unbalanced or
8 mono, balanced/unbalancedAll other FOX boards 1 stereo, balanced/unbalanced or
2 mono, balanced/unbalancedConnectors AEX 104 boards (4) 3.5 mm captive screw connectors, 5 pole All other FOX boards (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Nominal level HDMI boards -10 dBV (316 mVrms) All other FOX boards +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level (Hi-Z) VGA and DVI Plus boards +7.6 dBu, unbalanced at 1% THD+N AV boards >+19 dBu, unbalanced at 1% THD+N HDMI and AEX 104 boards >+11.0 dBu, balanced at 1% THD+N Maximum level (600 ohm) VGA and DVI boards >+6.3 dBu, unbalanced at 1% THD+N AV boards >+15 dBm, unbalanced at 1% THD+N HDMI and AEX 104 boards >+10.0 dBu, balanced at 1% THD+N Audio delay 1.5 frames Audio — PowerCage MTP T 15HD RSA, PowerCage MTP R 15HD RSA SEQ, PowerCage MTP T AV, PowerCage MTP R AV Number/signal type 1 set of proprietary analog signals Connector 1 female RJ-45 Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±1 dB THD + Noise 0.15% @ 1 kHz, 0.3% @ 20 kHz at nominal level S/N >70 dB at maximum output (unweighted) Stereo channel separation >60 dB @ 1 kHz CMRR >43 dB @ 20 Hz to 20 kHz Audio input — PowerCage MTP T 15HD RSA, PowerCage MTP T AV Number/signal type PowerCage MTP T 15HD RSA 1 stereo, unbalanced PowerCage MTP T AV 1 stereo, balanced/unbalanced Connector (1) 3.5 mm captive screw connector, 5 pole Impedance PowerCage MTP T 15HD RSA >10k ohms, unbalanced PowerCage MTP T AV >10k ohms, unbalanced; >20k ohms, balanced; AC coupled Nominal levels +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level +18 dBu, (unbalanced) at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output — PowerCage MTP R 15HD RSA SEQ, PowerCage MTP R AV Number/signal type PowerCage MTP R 15HD RSA SEQ 1 mono, balanced/unbalanced PowerCage MTP R AV 2 mono, balanced/unbalanced Connector (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±1 dB channel to channel Nominal levels +4 dBu (1.23 Vrms), -10 dBV (316 mVrms) Maximum level +18 dBu, unbalanced at 1% THD+N Control/remote NOTE PowerCage MTP AV Series boards and PowerCage FOX AEX boards do not have any RS-232 communication.
PowerCage MTP 15HD Series boards have only pass-through RS-232 communication.Serial control ports Enclosure 1 bidirectional RS-232, 2.5 mm mini stereo jack (front panel) PowerCage FOX boards Control 1 bidirectional RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles; shared with the alarm port) Pass-through 1 RS-232, 3.5 mm captive screw connector, 5 pole (3 pins are used, "RS-232 Over Fiber") PowerCage MTP 15HD boards External device; pass-through, uni- or bidirectional
Input/output: 1 set of proprietary signals on a female RJ-45 jack
Output/input: 1 RS-232 via 3 poles of a 3.5 mm captive screw connector (3 pole for transmitter, 5 pole for receiver)Baud rate and protocol PowerCage FOX boards Control 9600 baud, 8 data bits, 1 stop bit, no parity Pass-through 9600 to 115,200 baud PowerCage MTP 15HD boards Baud rates Up to 38400 bps at up to 600' (182.9 m)
(Higher data rates and distances are possible. Performance varies based on baud rate and cable length.)Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
Defaults: 8 data bits, 1 stop bit, no parityNOTE For PowerCage MTP boards, protocol is mirrored between the transmitter and the receiver. Serial control pin configurations Captive screw connector PowerCage FOX boards 1 = Tx, 2 = Rx, 3 = GND PowerCage MTP 15HD boards Transmitter: 1 = Tx, 2 = Rx, 3 = GND
Receiver: 3 = GND, 4 = Tx, 5 = RxMini stereo jack RS-232: tip = Tx, ring = Rx, sleeve = GND Program control For FOX boards only:
Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)General Recommended cable type For PowerCage MTP boards: Extron Enhanced Skew-Free™ AV UTP cable or CAT 5/5e/6 (shielded or unshielded) Power supply Internal, 1 or 2* (positive-negative), primary and redundant, hot-swappable
100-240 VAC, 50-60 Hz
*A redundant power supply is optional.Power consumption System Enclosure without boards: 12.4 watts Individual FOX boards FOX Tx VGA: 5.68 watts
FOX Rx VGA: 6.54 watts
FOX Tx DVI: 5.67 watts
FOX Rx DVI: 5.50 watts
FOX 3G HD-SDI: 1.84 watts
FOX Tx AV: 6.89 watts
FOX Rx AV: 5.57 watts
FOX DVI Plus Tx: 5.68 watts
FOX DVI Plus Rx: 6.18 watts
FOX Tx HDMI: 6.02 watts
FOX Rx HDMI: 6.02 watts
FOX SR HDMI: 8.8 watts
FOX AEX 104: 7.9 wattsIndividual MTP boards MTP T 15HD RSA: 4.30 watts
MTP R 15HD RSA SEQ: 8.38 watts
MTP T AV: 2.69 watts
MTP R AV: 3.92 wattsPower input requirements for boards 12 VDC, 1.0 A, supplied by the PowerCage enclosure Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Enclosure: fans, front to back
Boards: convection, within the PowerCage enclosureThermal dissipation FOX SR HDMI board 29.8 BTU/hr FOX AEX 104 27.0 BTU/hr All other boards 27.6 BTU/hr Mounting — PowerCage enclosure Rack mount Yes Enclosure type Metal Enclosure dimensions PowerCage enclosure 5.25" H x 17.0" W x 12.25" D (3U high, full rack wide)
13.3 cm H x 43.2 cm W x 31.2 cm D
(Depth excludes connectors on the optional boards. Width excludes rack ears.)PowerCage FOX boards Each fits a double slot opening in a PowerCage enclosure. PowerCage MTP R 15HD RSA SEQ Each fits a double slot opening in a PowerCage enclosure. All other boards Each fits a single slot opening in a PowerCage enclosure. Product weight PowerCage enclosure 11.6 lbs (5.3 kg) PowerCage FOX boards 1.1 lbs (0.5 kg) PowerCage MTP R 15HD RSA SEQ 1.0 lbs (0.5 kg) All other boards 0.8 lbs (0.4 kg) Shipping weight PowerCage enclosure 13 lbs (6 kg) Boards 2 lbs (1 kg) each Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (8.1-121114-D15) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-978-01 22,9 cm 53,3 cm 53,3 cm 7,94 kg 70-1084-01 6,7 cm 34,0 cm 22,9 cm 1,03 kg