DTP CrossPoint 84
EUR
8304.00
€ 8304.00
Hersteller
Extron
Art.Nr.
60-1368-01
EAN
60-1368-01
Gewicht
8 kg
Produktbeschreibung
Hauptmerkmale
- 8x4 Kreuzschiene für 4K, Skalierer, Audio-DSP-Prozessor, Audioverstärker und Steuerungsprozessor in einem Gerät
- Zwei DTP- und sechs HDMI-Eingänge
- Zwei HDMI- und zwei unabhängig skalierte DTP-Ausgänge
- Integrierte DTP-Eingänge und -Ausgänge unterstützen die Übertragung von Video, Steuerung und Audio bis zu 100 m über ein geschirmtes CATx-Kabel
- Unterstützt 4K-Signale an allen Eingängen und beiden HDMI-Ausgängen
- Verfügbar mit integriertem IPCP Pro 350-Steuerungsprozessor
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
DTP CrossPoint 84 | Vorverstärker-Ausgang ohne Verstärker und Steuerungsprozessor | 60-1368-01 | |
DTP CrossPoint 84 IPCP SA | Stereo-Verstärker mit 2 x 50 W | 60-1368-12 | |
DTP CrossPoint 84 IPCP SA | Stereo-Verstärker mit 2 x 50 W, LinkLicense-Upgrade für Benutzeroberflächen | 60-1368-12A | |
DTP CrossPoint 84 IPCP MA 70 | Mono-Verstärker mit 100 W bei 70 V | 60-1368-13 | |
DTP CrossPoint 84 IPCP MA 70 | Mono-Verstärker mit 100 W bei 70 V, LinkLicense-Upgrade für Benutzeroberflächen | 60-1368-13A |
Technische Daten
Technische Daten
-
DTP CrossPoint 84 Series specification Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type HDMI 1.4, HDCP 1.4 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator (http://www.extron.com/product/videotools.aspx) to determine video parameters supported by this data rate. Video Routing 8 x 4 matrix Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) Resolution Up to 2560x1600* @ 60 Hz or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
(* reduced blanking)Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI, HDCP 1.3, CEA-861E Video input Number/signal type 6 HDMI digital video (HDCP compliant)
2 DTP or XTP (configurable)Connectors 6 female HDMI type A
2 female RJ-45Matrix video outputs (non scaled) Number/signal type 2 HDMI digital video (HDCP compliant) Connectors 2 female HDMI Scaled TP outputs Number/signal type 2 DTP, XTP, or HDBaseT (configurable) Connectors 2 female RJ-45 Video processing Digital pixel data bit depth 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) Colors 1.07 billion (10-bit processing) Video input Horizontal frequency 15 kHz to 100 kHz Vertical frequency 24 Hz to 75 Hz Resolution range 640x480 to 1600x1200 and 1920x1200* 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blankingScaled resolutions 640x4808, 800x6008, 852x4808, 1024x7688, 1024x8528, 1024x10248,1280x7688, 1280x8008, 1280x10248, 1360x7658, 1360x7688, 1365x7688, 1366x7688, 1365x10248, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 HzShielded twisted pair interconnection Connectors Female RJ-45 Termination standard TIA/EIA T568B Signal transmission distance Resolutions up to 1920x1200 and 1080p DTP 330 Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable DTP 230 Up to 230' (70 m) using shielded twisted pair cable or XTP DTP 24 TP cable 2560x1600* and 4k @ 30 Hz (* reduced blanking) DTP 330 Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 TP cable DTP 230 Up to 130' (40 m) using shielded twisted pair cable or XTP DTP 24 TP cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. NOTE Input and output mode signaling:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
XTP: HDMI with embedded audio plus RS-232 and IR
HDBT: HDMI with embedded audio plus RS-232 and IRAudio system (mic/line input to line output) Gain Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20 kHz, ±0.2 dB Input impedance >10k ohms unbalanced, >20k ohms balanced THD + Noise 0.01% at 1 kHz nominal level S/N 105 dB at maximum balanced output (unweighted) Crosstalk <-90 dB @ 20 Hz to 20 kHz, fully loaded Stereo channel separation >80 dB @ 20 Hz to 20 kHz Digital conversion 24-bit, 48 kHz Audio Routing 8 x 4 stereo switching matrix
4 x 4 microphone mixing matrixSupported formats — Pass through HDMI connectors LPCM up to 7.1/24-bit/192kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel Analog conectors Analog stereo audio DTP connectors De-embedded from HDMI [PCM only] or remote balanced/unbalanced analog Audio input Number/signal type 6 stereo, analog line level, balanced or unbalanced
6 stereo, de-embedded from HDMI (PCM only)
2 DTP (de-embedded from HDMI [PCM only] and remote balanced/unbalanced analog), or XTP (embedded digital)Connectors (6) 3.5 mm captive screw connectors, 5-pole for analog line level inputs
6 female HDMI type A
2 female RJ-45Analog audio Nominal level +4 dBu, -10 dBV adjustable via input gain Maximum level +21 dBu balanced, +15 dBu unbalanced Input gain adjustment -18 dB to +24 dB, 0.1 dB steps, adjustable per input NOTE Unbalanced analog inputs at a DTP Tx input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation. NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Mic/line input Number/signal type 4 mono, mic/line, balanced/unbalanced (with phantom power) Connectors (4) 3.5 mm captive screw connectors, 3-pole Impedance 10k ohms unbalanced, 20k ohms balanced Nominal level -60 dBV, +4 dBu, -10 dBV, adjustable via input gain Maximum level >+21 dBu at rated THD+N when mic gain is set to 0 dB Equivalent input noise <-120 dBV (1.0 µVrms) at +40 dB input gain CMRR >70 dB typical Input gain adjustment -18 dB to +80 dB, in 0.1 dB steps, adjustable per input Microphone volume range -100 dB to +12 dB DC phantom power +48 VDC, ±10% (inputs 1-4) switched on or off Audio output Number/signal type 4 HDMI embedded
2 DTP (embedded digital and remote balanced/unbalanced analog), XTP (embedded digital), or HDBaseT (embedded digital)
4 stereo balanced/unbalanced analog (variable)Connectors 4 female HDMI
2 RJ-45
(4) 3.5 mm captive screw, 5-poleImpedance Stereo audio 50 ohms unbalanced, 100 ohms balanced S/PDIF 75 ohms Gain error ±0.1 dB channel to channel Maximum level (Hi-Z) >+21 dBu, balanced or +15 dBu unbalanced Output volume range 0 to -100 dB in 0.1 dB steps EXP port Transmission type Proprietary Connectors 1 RJ-45 Inputs 8 channels Rx Outputs 16 channels Tx Audio format 24 bit, 48 kHz sampling, uncompressed EXP cable Shielded CAT 6 up to 10 meters Audio output — power amplifier (DTP CrossPoint 84 IPCP SA and DTP CrossPoint 84 IPCP MA models) Number/signal type SA models 1 stereo or mono (2 channels total) MA models 1 mono, 70 V Connector NOTE This connector accepts wires of 22 AWG to 12 AWG. SA models (1) 5 mm screw lock captive screw connector, 4-pole MA models (1) 5 mm screw lock captive screw connector, 2-pole Load impedance SA models 4 ohms minimum MA models 50 ohms minimum High pass filter (MA models) 80 Hz, 12 dB/octave roll off Amplifier type Class D Output power SA models 25 watts (rms) per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THDMA models 100 watts (rms) @ 70 V, 1 kHz, 0.1% THD Protection Clip limiting, thermal, short circuit, DC output Frequency response SA models 20 Hz to 20 kHz, +1/?3 dB @ 1 watt MA models 80 Hz to 20 kHz, +1/?3 dB @ 1 watt THD + Noise <0.1%, 1 kHz, 3 dB below clipping S/N >90 dB, 20 Hz to 20 kHz, unweighted Control/remote — switcher Serial control port 1 bidirectional RS-232, 3.5 mm captive screw connector, 3-pole (rear panel) Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity (default) Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd USB control port 1 front panel female USB mini-B USB standards USB 2.0, low speed Ethernet control port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, half/full duplex with autodetect Ethernet protocol DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP, ARP, Telnet Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Default gateway = 0.0.0.0
DHCP = offWeb server Up to 200 simultaneous sessions
40.0 MB nonvolatile user memoryProgram control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®, TelnetControl/remote — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over TP) NOTE Protocol is mirrored between the connected TP endpoints and the "Over TP" ports on the DTP CrossPoint 84. Signals from a control device pass into each DTP CrossPoint 84 "Over TP" port, are embedded with the TP signal, and sent to individual TP Tx or Rx endpoints for control of remote sink or source devices.
The "Over TP" ports are simply pass-through connections to TP endpoints. There is no IR insertion from any DTP CrossPoint 84 control port to the “Over TP” ports. RS-232 can be inserted from the Ethernet connection.Serial control pass-through ports DTP CrossPoint 84 input/TP Tx RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports) DTP CrossPoint 84 output/TP Rx RS-232 via (2) 3.5 mm, 5-pole captive screw connectors (shared with IR ports) Baud rates 300 to 115200 baud Protocol 8 or 7 data bits
1 or 2 stop bits
no parity (default), even or odd paritySerial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR pass-through control ports TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz DTP CrossPoint 84 input/TP Tx (2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports) DTP CrossPoint 84 output/TP Rx (2) 3.5 mm captive screw connectors, 5-pole (shared with RS-232 ports) IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx Control/remote — IPCP Pro 350 control processor (DTP CrossPoint 84 IPCP models) Memory SDRAM 512 MB Flash 4.5 GB Software and control options Software Extron Global Configurator Plus and Professional for Windows® Control options GlobalViewer®, TouchLink® for Web, TouchLink for iPad®, or TouchLink Pro touchpanels Ethernet control Network interface controllers (NICs) 1 Network switch 1 unmanaged 3 port switch Connectors 3 female RJ-45 connectors Data rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1Serial control Quantity/type 1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)Connectors (1) 3.5 mm captive screw connector, 5-pole
(2) 3.5 mm captive screw connectors, 3-poleBaud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parityNOTE The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.Pin configurations, serial, 5-pole captive screw RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ Pin configurations, serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd Digital I/O control Quantity/type 4 digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 5-pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance 29k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high >2.8 VDC Threshold high to low <2.0 VDC Digital outputs 250 mA sink from 24 VDC max. Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd IR/serial control Quantity/type 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 5-pole Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, odd, mark, or space parityPin configurations For each port, pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz Relay control Quantity/type 4 normally open relays Relay control connectors (1) 3.5 mm captive screw connector, 6-pole Relay control contact rating 24 VDC, 1 A General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption 111 watts Remote power capability Supports up to four endpoints (two DTP Tx, two DTP Rx) (remote power not available in XTP and HDBaseT modes) Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Fans, air flows from left to right (as viewed from front panel) Thermal dissipation 265 BTU/hr Mounting Rack mount Yes Enclosure type Metal Enclosure dimensions 3.5" H x 17.4" W x 15.3" D (2U high, full rack wide)
(8.9 cm H x 43.2 cm W x 38.9 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)Product weight 11.4 lbs (5.2 kg) Shipping weight 14 lbs (6.0 kg) DIM weight 22 lbs (10 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE Specifications are subject to change without notice. NOTE All nominal levels are at ±10%. (120216-D9) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1368-01 19,1 cm 57,2 cm 54,6 cm 5,44 kg 60-1368-12 19,1 cm 57,2 cm 54,6 cm 5,98 kg 60-1368-12A 19,1 cm 57,2 cm 54,6 cm 5,98 kg 60-1368-13 19,1 cm 57,2 cm 54,6 cm 5,98 kg 60-1368-13A 19,1 cm 57,2 cm 54,6 cm 5,98 kg