DVS 605

Technische Daten

DVS 605 Series
Video input
Number/signal type	2 RGBHV, RGBS, RGsB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video 3 HDMI (HDCP compliant)
Connectors	2 female 15-pin HD 3 female HDMI type A
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.0 V to 1.0 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	15 kHz to 100 kHz
Vertical frequency	24 Hz to 75 Hz
Resolution range	640x480 to 1920x1200*, NTSC, PAL, SECAM, 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 2K sampled pixel for pixel *reduced blanking
Return loss	>30 dB @ 5 MHz
DC offset (max. allowable)	0.5 V
Video processing
Decoder	12 bit digital (3D-adaptive comb filter)
Analog sampling	12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
Digital pixel data bit depth	8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
Colors	1 billion (10 bit processing)
Video output
Number/signal type
DVS 605, DVS 605 A	1 scaled RGBHV, RGBS, RGsB, or component video (YUVp/HDTV) 1 HDMI (HDCP compliant)
DVS 605 D, DVS 605 AD	1 scaled RGBHV, RGBS, RGsB, or component video (YUVp/HDTV) 1 HDMI (HDCP compliant) (1) 3G-SDI or HD-SDI with genlock and loop through
Connectors
DVS 605, DVS 605 A	1 female 15-pin HD 1 female HDMI type A
DVS 605 D, DVS 605 AD	1 female 15-pin HD 1 female HDMI type A 3 female BNC: (1) 3G-SDI and HD-SDI, 1 genlock, and 1 genlock loop-through
Minimum/maximum levels	0.0 V to 1.0 Vp-p for Y of component video and for G of RGsB 0.0 V to 0.7 Vp-p for RGB and for R-Y and B-Y of component video
Impedance	75 ohms
Return loss	>21 dB @ 5 MHz
DC offset	±300 mV max.
Scaled resolution	640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9,1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x768 6,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9,1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
Sync
Input type	RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
Output type	RGBHV, RGBS, RGsB, and bi-level or tri-level component video
Standards	Input: NTSC 3.58, NTSC 4.43, PAL, SECAM Output: SMPTE 242M, SMPTE 424M, SMPTE 292M, SMPTE 293M, SMPTE 295M
Input level	2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video tri-level sync 0.3 Vp-p for component video bi-level sync or RGsB
Output level	TTL: 5.0 Vp-p, unterminated
Input impedance	Horizontal: 75 ohms Vertical: 510 ohms
Output impedance	75 ohms
Max. input voltage	5.0 Vp-p
Output polarity	Positive or negative (selectable)
Audio — DVS 605 A, DVS 605 AD
Gain	Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response	Line out: 20 Hz to 20 kHz, ±0.5 dB
THD + Noise	Preamp: <0.110% @ 1 kHz, 20 kHz bandwidth, at maximum output level Line out: <0.025% @ 1 kHz, 20 kHz bandwidth, at maximum output level
S/N at maximum power output (unweighted)	Preamp: 90 dB at rated maximum output Line out: 90 dB at rated maximum output
Crosstalk	Preamp: ?-80 dB @ 1 kHz, fully loaded Line out: ?-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>84 dB @ 1 kHz
Audio input — DVS 605 A, DVS 605 AD
Number/signal type	5 stereo, balanced/unbalanced 3 stereo, de-embedded from HDMI (LPCM-2Ch only)
Connectors	(5) 3.5 mm captive screw connector, 5 pole 3 female HDMI type A
Impedance	>10k ohms unbalanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level	+21 dBu, (unbalanced)
Analog input gain	-53 dB to +24 dB, adjustable per input
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — DVS 605 A, DVS 605 AD
Number/signal type	Stereo/mono, balanced/unbalanced
Fixed output	1 analog 1 S/PDIF digital audio (LPCM-2Ch, Dolby Digital, or DTS only) 1 HDMI embedded 1 optional 3G-SDI or HD-SDI embedded
Variable output	1 analog
Connectors	(2) 3.5 mm captive screw connectors, 5 pole 1 female RCA (S/PDIF) 1 female HDMI type A (shared with HDMI video) 1 optional female BNC (shared with 3G-SDI or HD-SDI video)
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.25 dB channel to channel
Maximum level (Hi-Z)	>+21 dBu, balanced; >+11 dBu, unbalanced
Analog output volume range	0 dB to -100 dB in 1.0 dB increments
Control/remote — scaler
Serial control port	1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 5 pole (uses 3 poles)
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations	1 = Tx, 2 = Rx, 3 = GND, 4 = GND, 5 = modulated IR input
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, high speed
Ethernet control port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
Ethernet protocol	ARP, ICMP (ping), IP, TCP, UDP, DHCP, HTTP, Telnet
Ethernet default settings	Link speed and duplex level = autodetected DHCP = Off, IP address = 192.168.254.254
Web server	Up to 200 simultaneous sessions
Contact closure	1 rear panel 3.5 mm captive screw connector, 5 pole
Contact closure pin configurations	Pins 1, 2, 3, 4, 5 = inputs 1, 2, 3, 4, 5
IR remote control input	Rear panel captive screw connector (shared with RS-232, uses 2 poles): 38 kHz, hardwired, modulated TTL level (0 to 5 V) infrared up to 1 MHz
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption
Full load	28.0 watts
Quiescent	20.1 watts
Standby	14.6 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Fan, air flows from right to left (as viewed from front panel)
Thermal dissipation
Full load	95.1 BTU/hr
Quiescent	68.1 BTU/hr
Standby	49.3 BTU/hr
Mounting
Rack mount	Yes, with included, pre-installed brackets
Enclosure type	Metal
Enclosure dimensions	1.72" H x 17.5" W x 10.5" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 26.7 cm D) (Depth excludes connectors and knobs.  Width excludes rack ears.)
Product weight
DVS 605	4.9 lbs (2.2 kg)
DVS 605 D	5.1 lbs (2.3 kg)
DVS 605 A	5.3 lbs (2.4 kg)
DVS 605 AD	5.4 lbs (2.5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(020217-D8)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1059-01	10,2 cm	54,0 cm	39,4 cm	3,63 kg
60-1059-02	10,2 cm	54,0 cm	39,4 cm	3,63 kg
60-1059-03	10,2 cm	54,0 cm	39,4 cm	3,63 kg
60-1059-04	10,2 cm	54,0 cm	39,4 cm	3,63 kg