IN1606

Technische Daten

IN1606
Video input
Number/signal type	2 RGB, RGBcvS, component video (YUVi or YUVp/HDTV), S-video, composite video 4 HDMI digital video (HDCP compliant)
Connectors	2 female 15-pin HD 4 female HDMI
Equalization	Automatic
Input cable length	Up to 75' (22.9 m) for all supported input rates
Nominal level	1 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 100 kHz
Vertical frequency	24 Hz to 75 Hz
Resolution range	640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2k *reduced blanking
Return loss	>30 dB @ 5 MHz
DC offset (max. allowable)	1.5 V
Video processing
Decoder	12 bit digital (3D-adaptive comb filter)
Analog sampling	12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB)
Digital pixel data bit depth	8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI)
Colors	1 billion (10 bit processing)
Video output
Number/signal type	2 HDMI (HDCP)
Connectors	2 female HDMI
HDMI peripheral device power	200 mA per output
Scaled resolution	640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9,1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9,1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8 HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 Hz
Sync
Input type	RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video
Input standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	2.75 V to 5.0 Vp-p for RGBHV or RGBS 0.6 Vp-p for component video with tri-level sync 0.3 Vp-p for component video with bi-level sync or RGsB
Input impedance	Horizontal: 510 ohms Vertical: 510 ohms
Max. input voltage	5.0 Vp-p
Audio
Gain	Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response	20 Hz to 20k Hz, ±0.5 dB
THD + Noise	<0.1%, 20 Hz to 20k Hz at nominal level
S/N	>90 dB at maximum balanced output (unweighted)
Crosstalk	?-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
Bass	+12 dB to -24 dB @ 100 Hz
Treble	+12 dB to -24 dB @ 8 kHz
Audio input
Number/signal type	6 stereo line balanced or unbalanced 2 mono mic/line balanced or unbalanced (with available phantom power) 4 stereo, de-embedded from HDMI (PCM only)
Connectors	(6) 3.5 mm, 5 pole captive screw connectors for Line (2) 3.5 mm, 3 pole captive screw connector for Mic/Line 4 female HDMI type A
Impedance	>10k ohms unbalanced, >20k ohms balanced
Nominal level	Line inputs: +4 dBu, -10 dBV, adjustable Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
Maximum level	+21 dBu at rated THD+N when input gain is set to 0 dB
CMRR	>80 dB @ 1 kHz
Input gain adjustment	Line inputs: -18 dB to +24 dB, 0.1 dB steps, adjustable per input Mic/line inputs: -18 dB to +60 dB, 0.1 dB steps, adjustable per input LPCM-2Ch: -18 dB to +24 dB, 0.1 dB steps, adjustable per input
DC phantom power	+48 VDC ±10% (can be switched on or off per Mic/line input)
Audio output
Number/signal type	1 balanced or unbalanced stereo (variable) 1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels 2 HDMI embedded
Connectors	(2) 3.5 mm captive screw connectors, 5 pole 2 female HDMI
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.5 dB channel to channel
Maximum level (Hi-Z)	>+21 dBu, balanced; >+15 dBu, unbalanced
Output volume range	0 to -100 dB in 0.1 dB steps
Control/remote
Serial control port	1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole
Baud rate and protocol	9600, 8 data bits, 1 stop bit, no parity (default)
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, high speed
Ethernet control port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
Ethernet protocol	ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) Microsoft® Internet Explorer®, Telnet
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption
Full load	26 watts
Power save mode	<14 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Passive, side and top vents
Thermal dissipation
Full load	68.7 BTU/hr
Power save mode	45.4 BTU/hr
Mounting
Rack mount	Yes, with included, pre-installed brackets
Enclosure type	Metal
Enclosure dimensions	1.72" H x 17.5" W x 9.5" D (1U high, full rack wide) (4.4 cm H x 44.4 cm W x 24.1 cm D) (Depth excludes connectors and knobs. Width excludes rack ears.)
Product weight	4.9 lbs (2.2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(3792-111116-D11)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-1081-01	11,4 cm	54,6 cm	36,2 cm	3,04 kg