IN1608 xi
EUR
3480.00
€ 3480.00
Hersteller
Extron
Art.Nr.
60-1238-81
EAN
60-1238-81
Gewicht
3 kg
Produktbeschreibung
Hauptmerkmale
- Integriert HDMI-, analoge Video- und Audioquellen in Präsentationssysteme
- Neu DTP-Ausgang ist mit HDBaseT-fähigen Geräten kompatibel
- Integrierte DTP-Eingänge sowie -Ausgang unterstützen die Übertragung von Video, Steuerung und analogem Audio bis zu 100 m über ein geschirmtes CATx-Kabel
- Neu RS-232-Einspeisung von den Ethernet-Steuerungsanschlüssen
- Mit dem in die IPCP-Modelle integrierten AV-LAN-Switch mit drei Anschlüssen können AV-Geräte vom Unternehmensnetzwerk abgegrenzt werden
- DHCP-Server für AV-LAN
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
IN1608 xi | Standard-Modell | 60-1238-81 | |
IN1608 xi SA | Stereo-Verstärker mit 2 x 50 W | 60-1238-82 | |
IN1608 xi MA 70 | Mono-Verstärker mit 100 W und 70 V | 60-1238-83 | |
IN1608 xi IPCP SA | 2 x 50 W Stereo-Verstärker, AV-LAN | 60-1238-85 | |
IN1608 xi IPCP SA | 2 x 50 W Stereo-Verstärker, AV-LAN, LinkLicense-Upgrade für Benutzeroberflächen | 60-1238-85A | |
IN1608 xi IPCP MA 70 | 70 V Mono-Verstärker mit 100 W, AV-LAN | 60-1238-86 | |
IN1608 xi IPCP MA 70 | 70 V Mono-Verstärker mit 100 W, AV-LAN, LinkLicense-Upgrade für Benutzeroberflächen | 60-1238-86A |
Technische Daten
Technische Daten
-
IN1608 xi Video input Number/signal type Local input 2 RGB, RGBcvS, component video (YUVi/YUVp/HDTV), S-video, composite
4 HDMI/DVI (HDCP compliant)Remote inputs 2 DTP 330 (HDCP compliant) Connectors 2 female 15-pin HD
4 female HDMI type A
2 female RJ-45 connectorsHDMI equalization Automatic HDMI input cable length Up to 75' (22.9 m) for all supported input rates Nominal level 1 Vp-p for Y of component video and S-video, and for composite
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-videoMinimum/maximum levels Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain Impedance 75 ohms Horizontal frequency 15 kHz to 100 kHz Vertical frequency 24 Hz to 75 Hz Resolution range 640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2K
*reduced blankingReturn loss >30 dB @ 5 MHz DC offset (max. allowable) 1.5 V Video processing Decoder 12 bit digital (3D adaptive comb filter) Analog sampling 12 bits per color; 13.5 MHz standard (video) 170 MHz standard (RGB) Digital pixel data bit depth 8, 10, or 12 bits per channel; 165 MHz pixel clock (HDMI) Colors 1 billion (10 bit processing) Video output Number/signal type Local output 2 HDMI/DVI (HDCP compliant) Remote output 1 DTP 330 or HDBaseT (configurable HDCP compliant) Connectors 2 female HDMI
1 female RJ-45 connectorHDMI peripheral device power 200 mA per output Scaled resolution 640x4806,8,9, 800x6006,8,9, 852x4806,8,9, 1024x7686,8,9, 1024x8526,8,9, 1024x10246,8,9, 1280x7686,8,9, 1280x8006,8,9, 1280x10246,8,9, 1360x7656,8,9, 1360x7686,8,9, 1365x7686,8,9, 1365x10246,8,9, 1366x7686,8,9, 1400x10506,8, 1440x9006,8,9, 1600x9006,8, 1600x12006,8, 1680x10506,8, 1920x12006,8
HDTV 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz, 7 = at 59.94 Hz, 8 = at 60 Hz, 9 = at 75 HzSync Input type RGBHV, RGBS, RGsB, RGBcvS, bi-level or tri-level component video Input standards NTSC 3.58, NTSC 4.43, PAL, SECAM Input level 2.75 V to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video with tri-level sync
0.3 Vp-p for component video with bi-level sync or RGsBInput impedance Horizontal: 510 ohms
Vertical: 510 ohmsMax. input voltage 5.0 Vp-p Shielded twisted pair interconnection Connectors 3 female RJ-45 Termination standard TIA/EIA-T568B Signal transmission distance DTP 330 Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable HDBaseT Up to 330' (100 m) using shielded twisted pair cable or XTP DTP 24 STP cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. NOTE Output signals:
DTP: HDMI with embedded audio, analog audio, RS-232 and IR, and remote power
HDBaseT: HDMI with embedded audio, RS-232, and IRAudio Gain Unbalanced output: -6 dB; balanced output: 0 dB Frequency response 20 Hz to 20k Hz, ±0.5 dB THD + Noise <0.1%, 20 Hz to 20k Hz at nominal level S/N >90 dB at maximum balanced output (unweighted) Crosstalk ?-80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz Bass +12 dB to -24 dB @ 100 Hz Treble +12 dB to -24 dB @ 8 kHz Audio input Number/signal type 8 stereo line level balanced or unbalanced
2 mono mic/line level balanced or unbalanced (with available phantom power)
4 stereo, de-embedded from HDMI (PCM only)
2 DTP (de-embedded from HDMI [PCM only], or remote balanced/unbalanced, analog)Connectors (6) 3.5 mm captive screw connectors, 5 pole for line
(2) 3.5 mm captive screw connectors, 3 pole for mic/line
4 female HDMI type A
2 female RJ-45 connectorsImpedance >10k ohms unbalanced, >20k ohms balanced Nominal level Line inputs: +4 dBu, -10 dBV, adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustableMaximum level +21 dBu at rated THD+N when input gain is set to 0 dB CMRR >80 dB @ 1 kHz Input gain adjustment Line inputs: -18 dB to +24 dB, 1 dB steps, adjustable per input
Mic/line inputs: -18 dB to +60 dB, 1 dB steps, adjustable per input
LPCM-2Ch: -18 dB to +24 dB, 0.1 dB steps, adjustable per inputNOTE Unbalanced analog inputs applied at a DTP transmitter input have +12 dB of gain applied to bring the signal to a nominal level for balanced operation. DC phantom power +48 VDC ±10% (can be switched on or off per mic/line input) Audio output Number/signal type Local outputs 1 balanced or unbalanced stereo (variable)
1 balanced or unbalanced stereo; can be configured as stereo or two independently mixed mono channels
2 HDMI embeddedRemote output 1 DTP (embedded digital and remote balanced/unbalanced analog) or 1 HDBaseT (embedded digital) Connectors (2) 3.5 mm captive screw connectors, 5 pole
2 female HDMI
1 RJ-45 connectorImpedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.5 dB channel to channel Maximum level (Hi-Z) >+20 dBu, balanced; >+14 dBu, unbalanced Output volume range 0 to -100 dB in 1 dB steps NOTE System gain for the analog DTP receiver output is rated at -12 dB (unbalanced) and -6 dB (balanced). Audio output — power amplifier (MA and SA models only) Number/signal type Stereo models 1 stereo (default) or 2 mono (2 channels total) Mono models 1 mono, 70 V line Connectors NOTE This connector accepts wires of 22 AWG to 12 AWG. Stereo models (1) 5 mm screw lock captive screw connector, 4 pole Mono models (1) 5 mm screw lock captive screw connector, 2 pole Load impedance Stereo models 4 ohms minimum Mono models 50 ohms minimum High pass filter — MA models only 100 Hz, 12 dB/octave roll off Frequency response Stereo models 20 Hz to 20 kHz, -3 dB to +1 dB @ 1 W Mono models 100 Hz to 20 kHz, -3 dB to +1 dB @ 1 W THD + Noise <0.1% @ 1 kHz, 3 dB below clipping S/N >90 dB, 20 Hz to 20 kHz, unweighted Amplifier type Class D Output power Stereo models 25 watts per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts per channel, 4 ohms, 1 kHz, 0.1% THDMono models 100 watts (rms) @ 70 V, 1 kHz, 0.1% THD Protection Clip limiting, thermal, short circuit, DC output Communications — scaling presentation switcher Serial control port 1 bidirectional RS-232, 3.5 mm captive screw connector, 3 pole (rear panel) Baud rate and protocol 9600, 8 data bits, 1 stop bit, no parity (default) Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd USB control port 1 front panel female mini USB B USB standards USB 2.0, high speed All models except IPCP models Ethernet control port 1 female RJ-45 connector Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet Ethernet data rate 10/100Base-T, half/full duplex with autodetect Ethernet default settings Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.0.0
Gateway = 0.0.0.0
DHCP = offProgram control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Microsoft® Internet Explorer®Communications — external device (pass-through, unidirectional or bidirectional) (RS-232/IR over DTP or RS-232/IR over HDBT) NOTE Protocol is mirrored between the connected twisted pair endpoints and the "Over DTP" or "Over TP" ports on the IN1608 xi. Signals from a control device pass into each IN1608 xi "Over DTP" or "Over TP" port, are embedded with the twisted pair signal, and sent to individual twisted pair Tx or Rx endpoints for control of remote sink or source devices.
The "Over DTP" or "Over TP" IR connections are simply pass-through connections to twisted pair endpoints, and there is no IR insert from any IN1608 xi control port to “Over DTP” or “Over TP” ports. RS-232 can be inserted from the IN1608 xi Ethernet connection.Serial control pass-through ports IN1608 xi input/DTP Tx RS-232 via (2) 3.5 mm, 5 pole captive screw connectors (shared with IR ports) IN1608 xi output/TP Rx RS-232 via (1) 3.5 mm, 5 pole captive screw connector (shared with IR port) Baud rates Up to 115200 baud Protocol 6 - 8 data bits
1 or 2 stop bits
no parity (default)
even or odd parity
flow control = XON, XOFF, noneSerial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR pass-through control ports TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz IN1608 xi input/DTP Tx (2) 3.5 mm captive screw connectors, 5 pole (shared with RS-232 ports) IN1608 xi output/TP Rx (1) 3.5 mm captive screw connector, 5 pole (shared with RS-232 port) IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx Communications — IPCP Pro dual-NIC embedded control processor — IPCP models only Memory SDRAM 512 MB Flash 4.5 GB Software and control options Software Extron Global Configurator® Plus and Professional for Windows® Control options GlobalViewer®, Extron control for iPad and web, or TouchLink Pro touchpanels, or eBUS® button panels Ethernet control Network interface controllers (NICs) 2: 1 LAN, 1 AV LAN Network switch 1 AV unmanaged 3 port switch Connectors LAN: 1 female RJ-45 connector
AV LAN: 3 female RJ-45 connectorsData rate 10/100/1000Base-T, half/full duplex with autodetect Protocols DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP Default settings LAN Link speed and duplex level = autodetected
IP address = 192.168.253.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
DNS: 127.0.0.1AV LAN Link speed and duplex level = autodetected
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP server = disabled
DNS: 127.0.0.1DHCP server disabled IP address = 192.168.254.250
DNS: 127.0.0.1DHCP server enabled IP address = 192.168.254.1
Dynamic leased IP address pool = 192.168.254.100 - 192.168.254.149
Maximum lease count = 50
Lease time = 24 hoursSerial control Quantity/type 1 bidirectional RS-232, RS-422, RS-485 (port 1)
2 bidirectional RS-232 (ports 2 and 3)Connectors (1) 3.5 mm captive screw connector, 5 pole
(2) 3.5 mm captive screw connectors, 3 poleBaud rate and protocol 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityNOTE The 5-pole ports support both hardware and software flow control.
The 3-pole ports support software flow control.
The default for both types of ports is no flow control.Pin configurations, serial, 5-pole captive screw RS-232 (default) Pin 1 = Tx, 2 = Rx, 3 = Gnd, 4 = RTS, 5 = CTS RS-422 Pin 1 = Tx-, 2 = Rx-, 3 = Gnd, 4 = Tx+, 5 = Rx+ RS-485 Pins 1 and 2 (tied together) = data-, 3 = Gnd, 4 and 5 (tied together) = data+ Pin configurations, serial, 3-pole captive screw Pin 1 = Tx, 2 = Rx, 3 = Gnd Digital I/O control Quantity/type 4 digital input/output (configurable) Connectors (1) 3.5 mm captive screw connector, 5 pole Digital inputs Input voltage range 0 to 24 VDC, clamped at +30 VDC Input impedance >10k ohms Programmable pullup 1k ohms to +5 VDC Threshold low to high >2.8 VDC Threshold high to low <2.0 VDC Digital outputs 250 mA sink from 24 VDC max. Pin configurations 1, 2, 3, 4 = digital I/Os 1, 2, 3, 4; 5 = Gnd IR/serial control Quantity/type 2 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz Connector (1) 3.5 mm captive screw connector, 5-pole Baud rate and protocol (RS-232) 300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits;
no parity (default), even, or odd parityPin configurations For each port, pin 1 = signal, 2 = Gnd IR output carrier frequency 30 kHz to 300 kHz Relay control Quantity/type 4 normally open relays Relay control connectors (1) 3.5 mm captive screw connector, 6 pole Relay control contact rating 24 VDC, 1 A eBUS control eBUS control ports (1) 3.5 mm captive screw connector, 5 pole (uses 4 poles) eBUS pin configuration +V = +12 VDC; +S = + signal; -S = - signal; G = ground Recommended cable type Extron STP20-2/1000 or STP20-2P/1000 cable Maximum system cable length 1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details. eBUS power output 6 watts General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption Full load (amp output at 1/8 power) IN1608 xi 42 watts All xi amplifier models except IPCP models 67 watts All xi IPCP models 76 watts Power save mode IN1608 xi <33 watts All xi amplifier models except IPCP models <42 watts All xi IPCP models <47 watts Remote power capability HDBaseT mode Supports up to two endpoints (two DTP Tx) DTP mode Supports up to three endpoints (two DTP Tx, one DTP Rx) Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Fans, air flows right to left (as viewed from front panel) Fan noise <37 dB(A) at 1 m Thermal dissipation Full load (amp output at 1/8 power) IN1608 xi 123 BTU/hr All xi amplifier models except IPCP models 149 BTU/hr All xi IPCP models 179 BTU/hr Power save mode IN1608 xi <94 BTU/hr All xi amplifier models except IPCP models <110 BTU/hr All xi IPCP models <144 BTU/hr Mounting Rack mount Yes, with included, pre-installed brackets Enclosure type Metal Enclosure dimensions IN1608 xi 1.72" H x 17.5" W x 9.5" D (1U high, full rack wide)
(4.4 cm H x 44.4 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)All other models 3.47" H x 17.5" W x 9.5" D (2U high, full rack wide)
(8.8 cm H x 44.4 cm W x 24.1 cm D)
(Depth excludes connectors and knobs. Width excludes rack ears.)Product weight IN1608 xi 5.0 lbs (2.3 kg) All amplifier models except IPCP models 7.4 lbs (3.4 kg) All IPCP models 7.9 lbs (3.6 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4135-D2) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1238-86A 26,7 cm 40,6 cm 58,4 cm 5,23 kg