IN1808-Serie

€ 5472.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1615-01
EAN
60-1615-01

Produktbeschreibung

Hauptmerkmale

  • Integriert DisplayPort-, HDMI- und Audioquellen in Präsentationssysteme
  • Fortschrittlicher Extron Vector™ 4K-Skalierer
  • Unterstützt Signalauflösungen bis zu 4K/60 mit 4:4:4-Farbabtastung
  • Logo-Einblendung
  • Nahtlose Umschaltung mit wählbaren Übergangseffekten
  • Integrierte DTP2-Übertragung von 4K/60-Video-, Audio- und Steuerungssignalen bis zu 100 m über ein geschirmtes CATx-Kabel
Modell Beschreibung der Version Teilenummer
IN1808 Standardmodell 60-1615-01
IN1808 IPCP SA Steuerungsprozessor und Stereo-Verstärker 60-1615-02
IN1808 IPCP SA mit LinkLicense Steuerungsprozessor und Stereo-Verstärker, LinkLicense-Upgrade für Benutzeroberflächen 60-1615-02A
IN1808 IPCP MA 70 Steuerungsprozessor und 70 V-Mono-Verstärker 60-1615-03
IN1808 IPCP MA 70 mit LinkLicense Steuerungsprozessor und 70 V Mono-Verstärker, LinkLicense-Upgrade für Benutzeroberflächen 60-1615-03A

Technische Daten

Technische Daten

IN1808
specification
   
    Frame rate 1  24, 25, 30, 50, or 60 fps
    Chroma sampling 1  4:4:4 and 4:2:2, 4:2:0 at input only
    Color bit depth 1  8 or 10 bits per color
    Signal type  DVI v1.0, HDMI v1.4 and v2.0, DisplayPort v1.2, HDCP v1.4 and v2.2
    Max. video data rate 1 
       HDMI  18 Gbps (6 Gbps per color)
       DisplayPort  21.6 Gbps (5.4 Gbps per lane)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to
    determine video parameters supported by this data rate.
24096 x 2160/50-60 at 4:4:4 is available only for HDMI and DisplayPort connections.
3DTP2 and XTP are 8 bits per color for all 4096 x 2160 formats.
4 4:2:0 sub-sampling is supported at input only.
Video input
    Number/signal type  1 DisplayPort (HDCP compliant)
5 HDMI/DVI (HDCP compliant)
1 HDMI/DVI loop-out, configurable (HDCP compliant)
?2 DTP2/XTP-configurable (HDCP compliant)
    Connectors  1 female DisplayPort
5 female HDMI type A
1 female HDMI type A loop-out
2 female RJ-45
    Horizontal frequency  15 kHz to 135 kHz
    Vertical frequency  24 Hz to 75 Hz
    Resolution range  640x480 @ 60 Hz through 4096x2160 @ 60 Hz with 4:4:4 chroma sampling
Includes 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 2K, and 4K.
    Standards  DVI v1.0, HDMI v2.0, DisplayPort v1.2, HDCP v1.4 and v2.2
Video processing
    Digital sampling  8 or 10 bits per color; 600 MHz pixel clock maximum
    Colors  1.07 billion (10 bit 4:4:4 processing)
Video output
    Number/signal type  1 HDMI/DVI (HDCP compliant)
1 DTP2/XTP/HDBT, configurable (HDCP compliant)
    Connectors  1 female HDMI type A
1 female RJ-45
    Peripheral device power  250 mA per output (HDMI outputs only)
    Scaled resolution  640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008, 1680x10508, 1600x12008, 1920x12008, 2048x12008, 2048x15368, 2560x10808, ?2560x14408, 2560x16008, 3840x21601,2,3,4,5,6*,7*,8*, 4096x21601,2,3,4,5,6*,7*,8*, and Custom 1-8
?480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2K1,2,3,4,5,6,7,8, and UHD/4K1,2,3,4,5,6,7,8
?
123.98 Hz, 224 Hz, 325 Hz, 429.97 Hz, 530 Hz, 650 Hz, 759.94 Hz, 860 Hz
??*Available on HDMI output or to a DTP2 Rx
    Standards  DVI v1.0, HDMI v1.4 and v2.0, HDCP v1.4 and v2.2
Audio
    Gain  Unbalanced output: -6 dB; balanced output: 0 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  <0.1%, 20 Hz to 20 kHz at nominal level
    S/N  >90 dB at maximum balanced output (unweighted)
    Crosstalk  ?-80 dB @ 1 kHz, fully loaded
    Stereo channel separation  >80 dB @ 1 kHz
    Supported formats 
       Analog de-embedding  LPCM-2Ch
       HDMI pass-through  LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, ?Dolby Digital 2/0 Surround, Dolby Digital 2/0, Dolby Atmos 7.2, DTS-HD Master Audio, DTS-HD, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2-channel
Audio input
    Number/signal type  2 stereo line level, balanced or unbalanced
2 mono mic/line level, balanced or unbalanced, (with available phantom power)
6 stereo, de-embedded from HDMI/DisplayPort (PCM only)
2 DTP2/XTP (de-embedded HDMI—PCM only, or remote unbalanced analog*)
*Available only in DTP mode
    Connectors  (2) 3.5 mm, 5 pole captive screw for line
(2) 3.5 mm, 3 pole captive screw for mic/line
5 female HDMI type A
1 female DisplayPort
2 RJ-45 female
    Impedance  >10K ohms unbalanced, >20K ohms balanced
    Nominal level  Line inputs: +4 dBu (1.23 Vrms), -10 dBV (316 mVrms), adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
    Maximum level  Line inputs: +21 dBu balanced, +15 dBu unbalanced
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
    CMRR  >80 dB @ 1 kHz
    Input gain adjustment  Line inputs: -18 dB to +24 dB in 0.1 dB steps, adjustable per input
LPCM-2Ch inputs: -18 dB to +24 dB in 0.1 dB staps, adjustable per input
Mic/line inputs: -18 dB to +60 dB in 0.1 dB steps, adjustable per input
    DC phantom power  +48 VDC ±10% (can be switched on or off per mic/line input)
Audio output — Line out
    Number/signal type  2 stereo or 4 mono, balanced/unbalanced
1 HDMI, embedded
1 DTP2/XTP/HDPT (embedded digital, and remote balanced/unbalanced analog*)
*Available only in DTP mode
    Connectors  (2) 3.5 mm, 5 pole captive screw
1 female HDMI type A
1 female RJ-45
    Impedance  50 ohms unbalanced, 100 ohms balanced
    Gain error  ±0.5 dB channel to channel
    Maximum level (Hi-Z)  >+21 dBu, balanced; >+15 dBu, unbalanced
    Output volume range  0 to -100 dB in 0.1 dB steps
?(Volume control not available on loop output)
Audio output — power amplifier — IPCP models only
    Number/signal type 
       IN1808 IPCP SA  1 stereo (default) or 2 mono (2 channels total)
       IN1808 IPCP MA 70  1 mono, 70 V line
       NOTE     The 5 mm screw lock captive screw connector accepts wires of 22 AWG to 12 AWG.
    Connectors 
       IN1808 IPCP SA  (1) 5 mm, 4 pole, screw lock captive screw 
       IN1808 IPCP MA 70  (1) 5 mm, 2 pole, screw lock captive screw 
    Load impedance 
       IN1808 IPCP SA  4 ohms minimum
       IN1808 IPCP MA 70  50 ohms minimum
    Amplifier type  Class D
    Output power 
       IN1808 IPCP SA  25 watts per channel, 8 ohms, 1 kHz, 0.1% THD, or
?50 watts per channel, 4 ohms, 1 kHz, 0.1% THD
       IN1808 IPCP MA 70  ??100 watts (rms) @ 70 V, 1 kHz, 0.1% THD
    Protection  Clip limiting, thermal, short circuit, DC output
    Frequency response  20 Hz to 20 kHz, -3 dB to +1 dB @ 1 W
    THD + Noise  <0.1% @ 1 kHz, 3 dB below clipping
    S/N  >90 dB, 20 Hz to 20 kHz, unweighted
Communications
    Serial control port  1 bidirectional RS-232, 3.5 mm, 3 pole captive screw connector (rear panel)
    Baud rate and protocol  9600, 8 data bits, 1 stop bit, no parity (default)
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    USB control port  1 female mini USB B (?front panel)
    USB standards  USB 2.0, high speed
    Ethernet 
       Connector  1 female RJ-45*?
*IPCP models use IPCP Ethernet ports.
       Ethernet data rate  10/100/1000Base-T, half/full duplex with autodetect
       Ethernet protocol  ARP, ICMP (ping), IP, TCP, DHCP, HTTP, Telnet
       Ethernet default settings  Link speed and duplex level = autodetected
IP address = 192.168.254.254
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
DHCP = off
       Storage  512 MB user memory
    Program control  Extron Product Configuration Software (PCS) program for Windows®
Extron Simple Instruction Set (SIS)
Microsoft® Internet Explorer®?
Communications — IPCP Pro Control Processor with AV LAN — IPCP models only
    Memory 
       SDRAM  512 MB
       Flash  4.5 GB
   Software and control options ?
       Software  Extron Global Configurator Plus and Professional for Windows®?
       Control options  GlobalViewer®, eBus®, TouchLink® for Web, Touchlink for iPad®, or TouchLink Pro touchpanels
    Ethernet control 
       Network interface controllers (NICs)  2: 1 LAN, ?1 AV LAN
       AV LAN network switch  1 unmanaged 3 port switch
       Connectors 
          LAN  ?1 female RJ-45
          AV LAN  3 female RJ-45
       Ethernet data rate  10/100/1000Base-T, half/full duplex with autodetect
       Protocols  DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UPD/IP
       Default settings 
          LAN  IP address = 192.168.253.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
?DHCP = Off
DNS = 127.0.0.1
          AV LAN  Link speed and duplex level = autodetect
DHCP server = disabled
IP address = 192.168.254.250
Subnet mask = 255.255.255.0
Gateway = 0.0.0.0
          DHCP server disabled  IP address = 192.168.254.250
?DNS = 127.0.0.1
          DHCP server enabled  IP address = 192.168.254.1
?Dynamic leased IP address pool = 192.168.254.100 – 192.168.254.149
Maximum lease count = 50
?Lease time = 24 hours
Communications — external device RS-232/IR over DTP2/XTP/HDBT
    Serial control pass-through ports  DTP2/XTP Tx to IN1808:
RS-232 can be transmitted to and from DTP2/XTP/HDBT Tx via Ethernet insertion.

IN1808 to DTP2/XTP/HDBT Rx:  
IR pass-through via (1) 3.5 mm, 3 pole captive screw connector
       Baud rates  Up to 115200 baud
       Protocol  6 to 8 data bits
1 or 2 stop bits
Even or odd parity, no parity (default)
    IR control pass-through ports  IN1808 to TP Rx: (1) 3.5 mm, 3 pole captive screw connector
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 60 kHz
    IR control pin configuration  1 = Tx, 2 = Rx, ?3 = Gnd
General
    Power supply  Internal
Input: 100-240 VAC, 50-60 Hz
    Power consumption 
       Full power 
          IN1808  TBD watts
          IN1808 IPCP SA  TBD watts
          IN1808 IPCP MA 70  ?TBD watts
       Power save mode 
          IN1808  TBD watts
          IN1808 IPCP SA  ?TBD watts
          IN1808 IPCP MA 70  ?TBD watts
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling 
       IN1808  2 fans, air flows from right to left (when viewed from the front)
       IN1808 IPCP SA and IPCP MA 70  1 fan, air flows from right to left (when viewed from the front)
    Fan noise 
       IN1808  ?TBD dB(A)
       IN1808 IPCP SA and IPCP MA 70  TBD db(A)
    Thermal dissipation 
       Full power 
          IN1808  TBD BTU/hr
          IN1808 IPCP SA  TBD BTU/hr
          IN1808 IPCP MA 70  TBD BTU/hr
       Power save mode 
          IN1808  TBD BTU/hr
          IN1808 IPCP SA  TBD BTU/hr
          IN1808 IPCP MA 70  TBD BTU/hr
    Mounting 
       Rack mount  Yes, with optional rack shelf
       Furniture mount  Yes, with optional under-desk or through-desk mounting kit
    Enclosure type  Metal
    Enclosure dimensions 
       IN1808  1.75" H x 17.5" W x 10.5" 
(4.4 cm H x 44.4 cm W x 26.7 cm D)
       IN1808 IPCP SA and IPCP MA 70  3.50" H x 17.5" W x 10.5" D
(8.9 cm H x 44.4 cm W x 26.7 cm D)
    Product weight 
       IN1808  TBD lbs (TBD kg)
       IN1808 IPCP SA  TBD lbs (TBD kg)
       IN1808 IPCP MA 70  TBD lbs (TBD kg)
    Regulatory compliance  ?CE, c-UL, UL, PSE, RoHs, and WEEE
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4291-D1)