MLS 406

Technische Daten

MLS 406 Series
Video
Gain	Unity
Bandwidth	280 MHz (-3 dB)
Differential phase error	1.0° at 3.58 MHz and 4.43 MHz
Differential gain error	1.0% at 3.58 MHz and 4.43 MHz
Crosstalk	-68 dB @ 10 MHz, -39 dB @ 100MHz
Switching speed	5 ms (max.)
Video input and loop through
Number/signal type	3 RGBHV, RGBS, RGsB, RsGsBs 1 RGBHV, RGBS, RGsB, RsGsBs local monitor loop-through 3 S-video 3 composite video
Connectors	3 female 15-pin HD (RGB), 1 female 15-pin HD (RGB loop-through) 3 female 4-pin mini DIN (S-video) 3 female BNC (composite video)
Nominal level	1 Vp-p for Y of S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for C of S-video (MLS 406 Series)
Minimum/maximum levels
RGB	Analog: 0.3 V to 1.5 Vp-p with no offset
S-video, composite video	Analog: 0.4 V to 2.0 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	15 kHz to 145 kHz
Vertical frequency	30 Hz to 170 Hz
Return loss
RGB	<-40 dB @ 5 MHz
S-video	<-25 dB, 0 to 10 MHz
Composite video	<-40 dB, 0 to 10 MHz
DC offset (max. allowable)	1.5 V
Video output
Number/signal type	1 RGBHV, RGBS, RGsB, RsGsBs (follows input) 1 S-video 1 composite video
Connectors	5 female BNC (RGB) 2 female BNCs (S-video) 1 female BNC (composite)
Nominal level	1 Vp-p for Y of S-video, and for composite video 0.7 Vp-p for RGB 0.3 Vp-p for C of S-video
Minimum/maximum levels
RGB	Analog: 0.3 V to 1.5 Vp-p (follows input)
Composite video	Analog: 0.4 V to 2.0 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-40 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset
Switching type	Triple-Action (RGB delay)
Sync
Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB, RsGsBs (follows input)
Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	2.0 V to 5.0 Vp-p
Output level	TTL: 5.0 Vp-p, unterminated
Input impedance	10k ohms
Output impedance	75 ohms
Max. input voltage	5.0 Vp-p
Max. propagation delay	30 ns
Max. rise/fall time	4.0 ns
Polarity	Positive or negative (follows input)
Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response at 1 watt output
Preamp/Lineout	20 Hz to 20 kHz, ±0.5 dB
Direct (4/8 ohm)	20 Hz to 20 kHz, ±1.0 dB
Transformer (70 V or 100 V mono amplifier)
	50 Hz to 20 kHz, +0 dB/-3 dB
THD + Noise
Power amp (mono or stereo)	0.037% @ 1 kHz at nominal level (1 watt, 8 ohm load)
Preamp	0.11% @ 1 kHz at nominal level
Lineout	0.018% @ 1 kHz at nominal level
S/N at maximum power output (unweighted)
Power amp	>75 dB @ 10 Hz to 22 kHz
Preamp	>80 dB @ 10 Hz to 22 kHz
Lineout	>80 dB @ 10 Hz to 22 kHz
Crosstalk
Power amp	<-75 dB @ 1 kHz, fully loaded
Preamp	<-75 dB @ 1 kHz, fully loaded
Lineout	<-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
CMRR	>85 dB @ 20 Hz to 200 Hz, >75 dB @ 20 Hz to 20 kHz
Bass	±10 dB @ 100 Hz
Treble	±10 dB @ 10 kHz
Loudness (contour)	+6 dB @ 100 Hz to 10 kHz
Audio input
Number/signal type	5 stereo, unbalanced (inputs 1-3, 5, 6) 1 stereo, balanced/unbalanced (input 4) 1 Aux/Mix balanced/unbalanced mono (nonswitchable)
Connectors	3 pairs of female RCA connectors (inputs 1-3) 1 female 3.5 mm captive screw connector, 5 pole (input 4) 2 female 3.5 mm mini stereo jacks (unbalanced only) (inputs 5, 6); tip (L), ring (R), sleeve (GND) (1) 3.5 mm captive screw connector, 3-pole (Aux/Mix input)
Impedance
Aux/Mix input	>18k ohms unbalanced, DC coupled
All other inputs	>10k ohms unbalanced, DC coupled
Nominal level	-10 dBV (316 mVrms)
Input gain adjustment	-42 dB to +24 dB, adjustable per input
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — Lineout and Preamp
Number/signal type	2 (1 Lineout/fixed and 1 Preamp/variable) stereo/mono, balanced/unbalanced
Connectors	(2) 3.5 mm captive screw connectors, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.8 dB channel to channel
Nominal level	Configurable: -10 dBV (316 mVrms, default), +4 dBu (1.23 Vrms)
Maximum level (600 ohm)
Preamp	>+19 dBu, balanced <0.1% THD+N
Lineout	>+16 dBu, balanced <0.1% THD+N
NOTE     Unbalanced wired outputs produce 6 dB of attenuation.  Balanced outputs have unity gain/attenuation.
Audio output — mono power amp (MLS 406MA only)
Number/signal type	(1) mono
Connector	(1) 5-position screw terminal
Sensitivity	-20 dBV (-17.8 dBu; 100 mVrms) (adjustable) for maximum power output
Power bandwidth
Direct (4 ohm)	1 kHz at 4 ohms
Direct (8 ohm)	20 Hz to 20 kHz, 0.15% THD
Transformer (70 V)	50 Hz to 20 kHz, 1% THD
Transformer (100 V)	50 Hz to 20 kHz, 0.5% THD
Maximum power output
Direct (4/8 ohm)	20 watts max. (continuous)
Transformer (70/100 V)	16 watts max. (continuous), transformer coupled
Protection	Input limiting, thermal, short circuit
Audio output — stereo power amp (MLS 406SA only)
Number/signal type	(1) stereo (default) or dual mono (configured via software)
Connector	(1) 5-position screw terminal
Sensitivity	-20 dBV (-17.8 dBu; 100 mVrms) (adjustable) for maximum power output
Power bandwidth
Direct (4 ohm)	1 kHz at 4 ohms
Direct (8 ohm)	20 Hz to 20 kHz, 0.8% THD
Maximum power output
Direct (4 ohm)	24 watts max. (continuous), 12 watts (rms) per channel
Direct (8 ohm)	16 watts max. (continuous), 8 watts (rms) per channel
Protection	Input limiting, thermal, short circuit
Control/remote — switcher
Serial control port	RS-232, 3.5 mm captive screw connector, 5 pole (uses 3 poles)
Baud rate and protocol	9600, 8-bit, 1 stop bit, no parity
Serial control pin configuration	1 = Tx, 2 = Rx, 4 = GND
Program control	Extron configuration program for Windows® Extron Simple Instruction Set (SIS™)
General
Power	Internal Input: 100-240 VAC, 50-60 Hz, 48 watt power supply
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +113 °F (0 to +45 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with included brackets
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.5" W x 8.5" D (1U high, full rack wide) 4.4 cm H x 44.4 cm W x 21.6 cm D (Depth excludes connectors and knob.  Width excludes rack ears.)
Product weight
MLS 406	5.0 lbs (2.3 kg)
Amplified models	6.0 lbs (2.7 kg)
Shipping weight
MLS 406	10 lbs (5 kg)
Amplified models	11 lbs (5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-041311-D11)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-560-01	12,7 cm	33,0 cm	48,9 cm	3,65 kg