MPS 112

Technische Daten

MPS 112, MPS 112CS
Video
Gain	Unity
Bandwidth
VGA signals	350 MHz (-3 dB)
S-video signals	250 MHz (-3 dB)
Composite video signals	300 MHz (-3 dB)
Differential phase error	1.0° at 3.58 MHz and 4.43 MHz
Differential gain error	1.0% at 3.58 MHz and 4.43 MHz
Crosstalk
VGA signal group	-50 dB @ 10 MHz, -30 dB @ 100 MHz
Switching speed
VGA group's sync	<5 ms (max.)
VGA/S-video/composite video	~100 ms
Video input
Number/signal type
VGA inputs	4 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (Y, R-Y, B-Y)
S-video inputs	4 NTSC/PAL/SECAM S-video
Composite video inputs	4 NTSC/PAL/SECAM composite video
Connectors
VGA inputs	4 female 15-pin HD
S-video inputs	4 female 4-pin mini DIN
Composite video inputs	4 female BNC
Nominal level
VGA inputs	1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video
S-video inputs	Y: 1 Vp-p (including sync), C: 0.3 Vp-p
Composite video inputs	1 Vp-p (including sync)
Minimum/maximum levels
VGA inputs	Analog 0.3 V to 1.5 Vp-p with no offset
S-video inputs	Analog Y: 0.4 V to 2.0 Vp-p with no offset
Composite video inputs	Analog 0.4 V to 2.0 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	15 kHz to 145 kHz
Vertical frequency	30 Hz to 170 Hz
Return loss
VGA inputs	<-40 dB @ 5 MHz
S-video inputs	<-25 dB, 0 to 10 MHz
Composite video inputs	<-40 dB, 0 to 10 MHz
Video output
Number/signal type
VGA outputs	1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs, HDTV component video (Y, R-Y, B-Y)
S-video outputs	1 S-video
Composite video outputs	1 composite video
Connectors
VGA outputs	1 female 15-pin HD
S-video outputs	1 female 4-pin mini DIN
Composite video outputs	1 female BNC
Nominal level
VGA outputs	1.0 Vp-p for Y of component video 0.7 Vp-p for RGB and for R-Y and B-Y of component video
S-video outputs	Y: 1 Vp-p (including sync), C: 0.3 Vp-p
Composite video outputs	1.0 Vp-p (including sync)
Minimum/maximum levels
VGA outputs	Analog, 0.3 V to 1.5 Vp-p
S-video outputs	Analog, Y: 0.4 V to 2.0 Vp-p
Composite video outputs	Analog, 0.4 V to 2.0 Vp-p
Impedance	75 ohms
Return loss (VGA output)	<-40 dB @ 5 MHz
DC offset (max. allowable, VGA output)	±5 mV with input at 0 offset
Sync
Input type (VGA group)	RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
Output type (VGA group)	RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync (follows input)
Standards (S-video and composite video groups)	NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level	1.9 V to 5.0 Vp-p
Output level	TTL: 5.0 Vp-p (unterminated)
Input impedance	510 ohms
Output impedance	75 ohms
Max. input voltage	5.0 Vp-p
Max. propagation delay	30 ns
Max. rise/fall time	4.2 ns
Polarity	Positive or negative (follows input)
Audio — individual audio groups (VGA, S-video, composite video)
Gain	Unity
Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise	0.08% @ 1 kHz, 0.1% @ 20 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
Crosstalk	-105 dB @ 1 kHz, -91 dB @ 20 kHz (when all inputs are terminated) -93 dB @ 1 kHz, -70 dB @ 20 kHz (when all inputs are unterminated)
Stereo channel separation	>80 dB @ 20 Hz to 20 kHz
CMRR	>75 dB @ 20 Hz to 20 kHz
Audio input — individual audio groups (VGA, S-video, composite video)
Number/signal type	4 stereo, unbalanced, per each group
Connectors
VGA input group	4 female 3.5 mm stereo mini jacks; tip (L), ring (R), sleeve (GND)
S-video and composite video input groups	4 pairs of female RCA connectors per group
Impedance	>18k ohms unbalanced, AC coupled
Nominal level	-10 dBV (316 mVrms)
Maximum level	+9 dBV (2.82 Vrms), (unbalanced) at 1% THD+N
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output — individual audio groups (VGA, S-video, composite video)
Number/signal type	1 stereo, unbalanced, per each group
Connectors
VGA group	1 female 3.5 mm stereo mini jack, tip (L), ring (R), sleeve (GND)
S-video and video groups	1 pair of female RCA connectors per each group
Impedance	50 ohms unbalanced
Gain error	±0.1 dB channel to channel
Nominal level	-10 dBV (316 mVrms)
Maximum level (Hi-Z)	+9 dBV (2.82 Vrms) at 1% THD+N
Audio — program audio
Gain
When program volume is at default:	MPS 112: 0 dB for unbalanced output MPS 112CS: 0 dB for unbalanced output, +12 dB for balanced output
When program volume is at maximum:	MPS 112: +12 dB for unbalanced output MPS 112CS: +12 dB for unbalanced output, +18 dB for balanced output
Program volume range	0 to 100 (-70 dB to +12 dB)
Frequency response	20 Hz to 20 kHz, -0.1 dB to + 0.05 dB
THD + Noise	0.08% @ 1 kHz, 0.1% @ 20 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
Crosstalk	-105 dB @ 1 kHz, -91 dB @ 20 kHz (when all inputs are terminated) -93 dB @ 1 kHz, -70 dB @ 20 kHz (when all inputs are unterminated)
Stereo channel separation	100 dB @ 20 Hz, 80 dB @ 1 kHz, >55 dB @ 20 kHz
CMRR	>75 dB @ 20 Hz to 20 kHz
Audio output — program audio
Number/type
MPS 112	1 stereo, unbalanced
MPS 112CS	1 stereo, balanced/unbalanced
Connectors
MPS 112	(1) pair of RCA connectors
MPS 112CS	(1) 3.5 mm, 5-pole captive screw connector
Impedance
MPS 112	50 ohms unbalanced
MPS 112CS	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Nominal level when the main volume is set to default
MPS 112	-10 dBV (316 mVrms) unbalanced output
MPS 112CS	-2 dBu (632 mVrms) balanced output
Maximum level (Hi-Z)	+20 dBV (10 Vrms) at 1% THD+N
Talk-over (ducking) response time (typical)
Attack time	Instant
Release delay	5 seconds
Release time	1 second
Ducking level	0 dB to 30 dB, adjustable; default = 6 dB
Microphone input
Number/type
MPS 112	1 mono unbalanced
MPS 112CS	1 mono balanced/unbalanced
Connectors
MPS 112	(1) 1/4" (6.3 mm) audio connector; tip (signal), sleeve (ground)
MPS 112CS	(1) 3.5 mm, 3-pole captive screw connector
Impedance
MPS 112	>1k ohms unbalanced
MPS 112CS	>2.3k ohms unbalanced, >10k ohms balanced
Nominal level	-60 dBV (1 mV) when mic volume is set to 0 dB gain
Minimum level	-72 dBV (0.25 mVrms) when mic volume is set to +12 dB gain
Maximum level	-16 dBV (158 mVrms) at 1% THD+N when mic volume is set to -20dB gain
Microphone volume range	-66 dB to +12 dB
Microphone DC power
MPS 112	15 VDC, can be turned on or off
MPS 112CS	48 VDC phantom power, can be turned on or off
Control/remote — switcher
Serial control port	RS-232, female 9-pin D connector
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configuration	2 = TX, 3 = RX, 5 = GND
Program control	Extron control program for Windows® Extron Simple Instruction Set (SIS™)
General
Power	100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
Temperature/humidity	Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with included through-desk mounting kit
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.4" W x 8.5" D (1U high, full rack wide) 4.4 cm H x 43.2 cm W x 21.6 cm D (Depth excludes connectors and knobs. Width excludes brackets.)
Product weight	7.0 lbs (3.2 kg)
Shipping weight	10 lbs (5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, ICES, FCC Class A, VCCI
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(7.6-091109-D16)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-532-01	12,7 cm	33,0 cm	48,9 cm	3,22 kg