MPS 602
EUR
2052.00
€ 2052.00
Hersteller
Extron
Art.Nr.
60-1313-51
EAN
60-1313-51
Gewicht
3 kg
Produktbeschreibung
Hauptmerkmale
- Integriert HDMI-, RGB- und Audioquellen in Präsentationssysteme
- Ein DTP-Eingang, drei HDMI- und zwei RGB-Eingänge
- Wählbarer HDMI- oder DTP-Ausgang
- Integrierter DTP-Eingang und -Ausgang unterstützen die Übertragung von Video-, Steuerungs- und analogen Audiosignalen bis zu 100 m über ein geschirmtes CATx-Kabel
- Mit energieeffizientem Klasse D-Stereo- oder Mono-Verstärker:
2 x 50 W bei 4 ?; 2 x 25 W bei 8 ?
1 x 100 W bei 70 V - JITC-zertifiziert
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
MPS 602 | Variabel vorverstärkter Ausgang - Kein Verstärker, DTP 330 | 60-1313-51 | |
MPS 602 SA | 2 x 50 W-Stereo-Verstärker, DTP 330 | 60-1314-51 | |
MPS 602 MA | 70 V-Mono-Verstärker mit 100 W, DTP 330 | 60-1315-51 |
Technische Daten
Technische Daten
-
MPS 602 Video — VGA Gain Unity Bandwidth 170 MHz (-3 dB) Crosstalk -50 dB @ 10 MHz, -30 dB @ 100 MHz Video — HDMI and DTP Maximum data rate 6.75 Gbps (2.25 Gbps per color) Maximum pixel clock 165 MHz Resolution 1920x1200 @ 60 Hz or 1080p @ 60 Hz, and 2K Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI 1.3, HDCP 1.1, CEA-861E Video input Number/signal type VGA inputs 2 VGA-QXGA, RGBHV, RGBS HDMI inputs 3 HDMI (or single link DVI-D, with appropriate DVI-HDMI adapters) DTP input 1 DTP 330 input Connectors VGA inputs 2 female 15-pin HD HDMI inputs 3 female HDMI, type A DTP input 1 RJ-45 female Nominal level VGA inputs 0.7 Vp-p for RGB Minimum/maximum levels VGA inputs Analog 0.3 V to 1.5 Vp-p with no offset Impedance 75 ohms Horizontal frequency 15 kHz to 145 kHz Vertical frequency 30 Hz to 170 Hz Return loss <-40 dB @ 5 MHz Video output Number/signal type Local VGA output 1 VGA-QXGA, RGBHV, RGBS HDMI outputs 1 HDMI (or single link DVI-D) DTP output 1 DTP 330 output DTP signal Transmission distance up to 330' (100 m) using shielded twisted pair (STP) or XTP DTP 24 cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (shielded twisted pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. Connectors Local VGA output 1 female 15-pin HD HDMI outputs 1 female HDMI type A DTP output 1 RJ-45 jack NOTE Outputs are selectable from either the HDMI output or DTP output. The switcher does not output to both connectors simultaneously. Analog RGB inputs are digitized for output from either the HDMI or DTP output. Nominal level VGA outputs 0.7 Vp-p for RGB Minimum/maximum levels VGA outputs Analog, 0.3 Vp-p to 1.5 Vp-p Impedance 75 ohms Return loss (VGA output) <-40 dB @ 5 MHz DC offset (max. allowable, VGA output) ±5 mV with input at 0 offset Sync — VGA Inputs Only Input type RGBHV, RGBS Local VGA output RGBHV, RGBS Input level 1.9 Vp-p to 5.0 Vp-p Output level TTL: 5.0 Vp-p (unterminated) for RGBHV, RGBS Input impedance 510 ohms Output impedance 75 ohms Max. input voltage 5.0 Vp-p Max. propagation delay 30 ns Max. rise/fall time 4.2 ns Polarity Positive or negative (follows input) Audio — individual audio groups (VGA, HDMI) Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise MPS 602 0.01% @ 1 kHz at nominal level MPS 602 SA/MA <0.1% @ 1 kHz 3 dB below clipping S/N MPS 602 >90 dB at maximum output (unweighted) MPS 602 SA/MA >90 dB 20 Hz to 20 kHz, unweighted Crosstalk <-72 dB @ 1 kHz or below, <-45 dB @ 20 kHz Stereo channel separation >80 dB @ 1 kHz CMRR >60 dB @ 1 kHz Audio input — (VGA, and HDMI video) Number/signal type VGA inputs 2 stereo, unbalanced/balanced HDMI inputs 3 stereo, unbalanced/unbalanced, or
3 embedded digital audio from HDMIDTP input 1 stereo, unbalanced analog
1 embedded digital audio from DTPEmbedded digital audio source formats 2-ch PCM Connectors VGA inputs (2) 3.5 mm captive screw connectors, 5-pole HDMI inputs (3) 3.5 mm captive screw connectors, 5-pole
3 female HDMI type ADTP input 1 female RJ-45 connector Input impedance >10k ohms unbalanced, 20k ohms balanced Nominal level +4 dBu balanced, -10 dBV unbalanced, configurable Maximum level +15.2 dBu, balanced, +9.2 dBu unbalanced CMRR >60 dB typical @ 1 kHz Input gain adjustment -18 dB to +24 dB, adjustable per input NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Number/signal type 2 stereo, balanced/unbalanced (fixed and variable outputs)
1 DTP analog audio and 1 embedded digital audio on DTP signal
1 embedded digital audio on HDMIConnectors (2) 3.5 mm captive screw connectors, 5-pole
1 RJ-45
1 female HDMI type AImpedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.5 dB channel to channel Nominal level when the main volume is set to default -2 dBu (632 mVrms) balanced output Maximum level +15.2 dBu balanced, +9.2 dBV unbalanced Talk-over (ducking) response time (typical) Attack time Instant Release delay 5 seconds Release time 1 second Ducking level 0 dB to 30 dB, adjustable; default = +6 dB Audio output — power amplifier Number/signal type MPS 602 SA 1 stereo (default) or 2 mono, 2 channels total MPS 602 MA 1 mono, 70V line Connector MPS 602 SA (1) 5 mm screw lock captive screw connector, 4-pole MPS 602 MA (1) 5 mm screw lock captive screw connector, 2-pole Load impedance MPS 602 SA 4 ohms minimum MPS 602 MA 50 ohms minimum Output power MPS 602 SA 25 watts rms per channel, 8 ohms, 1 kHz, 0.1% THD
50 watts rms per channel, 4 ohms, 1 kHz, 0.1% THDMPS 602 MA 100 watts rms 70V, 1 kHz, 0.1% THD THD + Noise 0.1% @ 1 kHz, 3 dB below clipping Amplifier type Class D Mic/line input Number/signal type 1 mono balanced/unbalanced Connector (1) 3.5 mm captive screw connector Impedance 10k ohms unbalanced, 20k ohms balanced Nominal level -60 dBV (1 mV), +4 dBu, -10 dBV, adjustable Equivalent input noise <-117 dBV (1.4 uVrms) when gain is set to 40 dB Maximum level +12 dBV (2 Vrms) when gain is set to 0 dB CMRR >60 dB typical @ 1 kHz Input gain adjustment -18 dB to +60 dB, 1 dB steps, adjustable per input Microphone volume range -66 dB to +12 dB Microphone DC power +48 VDC +10% phantom power, can be turned on or off NOTE Mic/line audio is not embedded on DTP analog audio output or digital embedded audio. Communications — switcher Serial control port 1 RS-232, 3.5 mm captive screw connector, 3-pole, rear panel Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity Serial control pin configuration 2 = Tx, 3 = Rx, 5 = Gnd USB control ports 1 front panel female mini USB B USB standards USB 2.0, high speed Program control Extron Simple Instruction Set (SIS™), Extron Product Configuration Software (PCS) Communications — external device (pass-through, unidirectional or bidirectional) NOTE Protocol is mirrored between the connected DTP 230 endpoints and the "Over DTP" input and output ports. Signals from a control device pass into each "Over DTP" port, are embedded with the DTP signal, and sent to individual DTP 230 Tx or Rx endpoints for control of remote sink or source devices.
The "Over DTP" ports are pass-through connections to DTP endpoints. There is no RS-232 or IR insertion from the MPS 602 control ports to the "Over DTP" ports.Quantity/type (2) RS-232 and IR via (2) 3.5 mm captive screw connectors, 5-pole Serial control pass-through ports (2) bidirectional RS-232 Input/DTP Tx (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port) Output/DTP Rx (1) RS-232 (1) 3.5 mm 5-pole captive screw connector (shared with IR port) Baud rates 300 to 115200 baud Protocol 8 or 7 data bits, 1 or 2 stop bits, no parity (default), even or odd parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR pass-through control ports 2 bidirectional TTL level (0 to 5 V) modulated infrared control
from 30 kHz up to 60 kHzInput/DTP Tx (1) RS-232 (1) 3.5 mm captive screw connector, 5-pole (shared with RS-232 port) Output/DTP Rx (1) RS-232 (1) 3.5 mm captive screw connector, 5-pole (shared with RS-232 port) IR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx General Power supply Internal
Input: 100-240 VAC, 50-60 HzPower consumption MPS 602 Full load, 22 W MPS 602 SA Full load, amp at 1/8 power: 44 W MPS 602 MA Full load, amp at 1/8 power: 44 W Remote power capability Supports up to two endpoints (one DTP Tx, one DTP Rx) Temperature/humidity Storage -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, vents on top and sides Power consumption 22 watts Thermal dissipation MPS 602 Full load, 69 BTU/hr MPS 602 SA Full load, amp at 1/8 power: 102 BTU/hr MPS 602 MA Full load, amp at 1/8 power: 102 BTU/hr Mounting Rack mount Yes, with included brackets Enclosure type Metal Enclosure dimensions 1.75" H x 17.4" W x 8.5" D (1U high, full rack wide)
4.4 cm H x 43.2 cm W x 21.6 cm D
(Depth excludes connectors and knobs. Width excludes rack ears.)Product weight 7.0 lbs (3.2 kg) Shipping weight 10 lbs (5 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, ICES, FCC Class A, VCCI, ICES Environmental Complies with the appropriate requirements of RoHS, WEEE Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (8.1-070115-D8) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1313-51 11,4 cm 54,6 cm 36,2 cm 2,63 kg 60-1314-51 11,4 cm 54,6 cm 36,2 cm 3,04 kg 60-1315-51 11,4 cm 54,6 cm 36,2 cm 3,04 kg