SW 12A

Technische Daten

SW 4/6/8/12AV Series Switchers
Video
Gain	Unity
Bandwidth
Composite video 4, 6, and 8 input models	300 MHz (-3 dB)
S-video models and composite video 12 input models	250 MHz (-3 dB)
Crosstalk	<-60 dB @ 5 MHz
Switching speed	<20 ms (max.)
Video input
Number/signal type
SW 8/12V, SW 4/6/8AV/AV RCA, SW 6/8/12A/A RCA	4, 6, 8, or 12 (depending on the model) composite video
SW 6/8/12SV, SW 4/6SVA/SVA RC	4, 6, 8, or 12 (depending on the model) S-video
Connectors
SW 8/12V, SW 4/6/8AV/AV RCA, SW 6/8/12A/A RCA	4, 6, 8, or 12 (depending on the model) female BNC
SW 6/8/12SV, SW 4/6SVA/SVA RC	4, 6, 8, or 12 (depending on the model) female 4-pin mini DIN
Nominal level	1 Vp-p for Y of S-video, and for composite video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.4 V to 2.0 Vp-p with no offset
Impedance	75 ohms
Return loss	<-29 dB @ 0 to 10 MHz
DC offset (max. allowable)	5.0 V
Video output
Number/signal type
Composite video models	2 buffered composite video
S-video models	1 buffered S-video, 1 buffered composite video
Connectors
Composite video models	2 female BNC
S-video models	1 female BNC, 1 female 4-pin mini DIN
Nominal level	1 Vp-p for Y of S-video, and for composite video 0.3 Vp-p for C of S-video
Minimum/maximum levels	0.4 V to 2.0 Vp-p (follows input)
Impedance	75 ohms
Return loss	-30 dB @ 5 MHz
DC offset	±5 mV with input at 0 offset
Switching type	Vertical interval switching
Sync
Genlock connectors	2 female BNC (1 input, 1 loop-through)
Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Audio
Gain	Adjustable.  When gain is set to unity (0 dB), balanced output from captive screw connectors or unbalanced output from RCA connectors has a 0 dB gain; unbalanced output from captive screw connectors is attenuated by 6 dB.
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	<0.04% @ 1 kHz at nominal level
S/N	>90 dB at maximum output (unweighted)
Audio input
Number/signal type
SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A	4, 6, 8, or 12 (depending on the model) stereo, balanced/unbalanced
SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA	4, 6, 8, or 12 (depending on the model) stereo, unbalanced
Connectors
SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A	4, 6, 8, or 12 (depending on the model) 3.5 mm captive screw connectors, 5 pole
SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA	8, 12, 16, or 24 (depending on the model) female RCA
Impedance
RCA models	12k ohms unbalanced, DC coupled
All other models	25k ohms unbalanced, 50k ohms balanced, DC coupled
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms), configurable
Maximum level	>+15 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment	–18 dB to +24 dB, adjustable per input
NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu.
Audio output
Number/signal type
SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A	2 stereo, balanced/unbalanced
SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA	1 stereo, unbalanced
Connectors
SW 4/6/8AV, SW 4/6SVA, SW 6/8/12A	(2) 3.5 mm captive screw connectors, 5 pole
SW 4/6AV RCA, SW 4/6SVA RCA, SW 6A RCA	2 female RCA (1) 3.5 mm captive screw connector, 5 pole
Impedance	50 ohms unbalanced, 100 ohms balanced
Gain error	±0.1 dB channel to channel
Nominal level	+4 dBu (1.23 Vrms), -10 dBV (316 mVrms), configurable
Maximum level (Hi-Z)	>26 dBu, balanced; >+20 dBu, unbalanced at 1% THD+N
Maximum level (600 ohm)	>21 dBm, balanced; >+15 dBm, unbalanced at 1% THD+N
Control/remote — switcher
Serial control port	RS-232, female 9-pin D connector (also used for contact closure for 4- and 6-input models)
Baud rate and protocol	9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configuration	2 = Tx, 3 = Rx, 5 = GND
Contact closure (SW 4 and 6 models only)	1 female 9-pin D connector (also used for RS-232)
Contact closure pin configuration (SW 4 and 6 models only)	1 = input 1, 4 = input 2, 5 = GND, 6 = input 3, 7 = input 4, 8 = input 5, 9 = input 6
IR controller module	Extron IR 102 kit (optional)
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Mounting
Rack mount	Yes, with included rack mounting kit
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.75" H x 17.4" W x 8.5" D (1U high, full rack wide) 4.4 cm H x 44.2 cm W x 21.6 cm D (Depth excludes connectors.)
Product weight	7.0 lbs (3.2 kg)
Shipping weight	10 lbs (5 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-tick, FCC Class A, ICES, VCCI
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(8.0-090712-D9)

Versand-Abmessung und -Gewicht
Teilenummer	Höhe	Breite	Tiefe	Gewicht
60-483-20	12,7 cm	33,0 cm	48,9 cm	2,97 kg