SW2 VGA DA2 VGA-Umschalter-Serie
EUR
792.00
€ 792.00
Hersteller
Extron
Art.Nr.
60-297-11
EAN
60-297-11
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- 300 MHz (-3 dB) RGB-Videobandbreite
- Kompatibel mit VGA - QXGA- und HDTV-Komponenten-Videosignalen
- Jeder Ausgang einzeln gepuffert
- ID-Bits werden zum lokalen Monitor geführt
- Aktive Umschaltung von PC-Audio
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
SW2 VGA DA2 A | Eingänge auf der Rückseite | 60-297-11 | |
SW2 VGA DA2 AF | Eingänge auf der Vorder- und Rückseite | 60-297-12 |
Technische Daten
Technische Daten
-
SW2 VGA DA2 A/AF/AF R Video Gain Unity Bandwidth 300 MHz (-3 dB) Video input Number/signal type 2 VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* Connectors 2 VGA female 15-pin HD Nominal level 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component videoMinimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset Impedance 75 ohms Horizontal frequency 15 kHz to 145 kHz Vertical frequency 30 Hz to 170 Hz Video output Number/signal type 2 buffered VGA-QXGA RGBHV, RGBS, RGsB*, RsGsBs*, HDTV component video* Connectors 2 VGA female 15-pin HD Nominal level 1.0 Vp-p for Y of component video
0.7 Vp-p for RGB and for R-Y and B-Y of component videoMinimum/maximum levels 0.4 V to 1.8 Vp-p (follows input) Impedance 75 ohms NOTE *RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires TTL level sync on pin 13 of the 15-pin HD connector. Sync Input type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync Output type RGBHV, RGBS, RGsB*, RsGsBs*, bi-level and tri-level sync Input level 1.7 V to 5.0 Vp-p Output level TTL: 5.0 Vp-p, unterminated Input impedance 510 ohms Output impedance 50 ohms Max. input voltage 5.0 Vp-p Max. rise/fall time 40 ns Polarity Positive or negative (follows input) Audio Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.03% @ 1 kHz at nominal level S/N >90 dB at maximum output (unweighted) Crosstalk <-65 dB @ 20 kHz, <-80 dB @ 1 kHz and below 60 Hz Stereo channel separation >80 dB @ 1 kHz CMRR >75 dB @ 20 Hz to 20 kHz Audio input Number/signal type 2 stereo, unbalanced Connectors (2) 3.5 mm female stereo jacks Impedance >10k ohms, balanced/unbalanced, AC coupled Nominal level -10 dBV (316 mVrms) Maximum level +8 dBV, (balanced or unbalanced) at 1% THD+N NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Audio output Number/signal type 1 stereo, balanced/unbalanced Connectors (1) 3.5 mm captive screw connector, 5 pole Impedance 50 ohms unbalanced, 100 ohms balanced Gain error ±0.1 dB channel to channel Nominal level -2 dBu balanced, -10 dBV (316 mVrms) unbalanced Maximum level (Hi-Z) >+16 dBu, balanced; >+8 dBV, unbalanced at 1% THD+N Maximum level (600 ohm) >+10 dBm, balanced; >+4 dBV, unbalanced at 1% THD+N Control/remote — switcher Contact closure Momentary, on a 3.5 mm captive screw connector Contact closure pin configurations 1 = input #1, 2 = input #2 General Power SW2 VGA DA2 A/AF 100 VAC to 240 VAC, 50-60 Hz, external; to 12 VDC, 1 A power supply, regulated SW2 VGA DA2 A/AF's power input requirements 12 VDC, 0.2 A SW2 VGA DA2 AF R 100 VAC to 240 VAC, 50-60 Hz, 12 watts, internal Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, no vents Mounting Rack mount SW2 VGA DA2 A/AF Yes, with optional 1U rack shelf SW2 VGA DA2 AF R Yes, with included rack mounting kit Furniture mount SW2 VGA DA2 A/AF Yes, with included under-desk mounting kit SW2 VGA DA2 AF R Yes, with optional under-desk mounting kit Pole mount SW2 VGA DA2 A/AF Yes, with optional PMK 200 pole mount kit SW2 VGA DA2 AF R Yes, with optional PMK 200 pole mount kit Enclosure type Metal Enclosure dimensions SW2 VGA DA2 A/AF 1.0" H x 8.75" W x 3.0" D
2.5 cm H x 22.2 cm W x 7.6 cm D
(Depth excludes connectors.)SW2 VGA DA2 AF R 1.75" H x 17.4" W x 3.0" D (1U high, full rack wide)
4.4 cm H x 44.2 cm W x 7.6 cm D
(Depth excludes connectors.)Product weight SW2 VGA DA2 A/AF 1.1 lbs (0.5 kg) SW2 VGA DA2 AF R 2.6 lbs (1.2 kg) Shipping weight SW2 VGA DA2 A/AF 4 lbs (2 kg) SW2 VGA DA2 AF R 7 lbs (4 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE, C-tick, FCC Class A, ICES, KCC, VCCI Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (8.1-061314-D8) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-297-11 10,5 cm 22,2 cm 31,3 cm 1,14 kg 60-297-12 10,5 cm 22,2 cm 31,3 cm 0,86 kg