XTP FT HD 4K
EUR
2256.00
€ 2256.00
Hersteller
Extron
Art.Nr.
60-1276-11
EAN
60-1276-11
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- Überträgt Video, Audio, bidirektionale RS?232 und IR- sowie Ethernet-Signale mit einem Glasfaserkabel
- Unterstützt Computer- und Videoauflösungen bis zu 4K
- HDMI-Durchschliff mit wählbarer Audiosteuerung
- HDCP-konform
- Bidirektionale RS?232- und IR-Einspeisung zur AV?Gerätesteuerung
- Ethernet-Erweiterung
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
XTP FT HD 4K MM | HDMI-Sender - Multimode | 60-1276-11 | |
XTP FT HD 4K SM | HDMI-Sender - Singlemode | 60-1276-12 |
Technische Daten
Technische Daten
-
XTP FT HD 4K specification Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4 Max. video data rate 8.91 Gbps (2.97 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. NOTE The XTP FT HD 4K transmitter can be used with XTP receivers, with a fiber optic cable linking the transmitter and receiver, or with other Extron XTP products. NOTE These transmitters are class 1 laser products. They meet the safety regulations of IEC 60825-1. Video Gain Unity Resolution range Up to 2560x1600 @ 60 Hz* or
4K (4096x2160) @ 24 Hz, UHD (3840x2160) @ 30 Hz,
UHD @ 60 Hz with 4:2:0 chroma subsampling
* reduced blankingSignal type Single-link HDMI (or DVI-D or DisplayPort) Color bit depth 8, 10, or 12 bits — subject to the maximum data rate limit Maximum data rate 8.91 Gbps (2.97 Gbps per color) Maximum pixel clock 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) Formats RGB and YCbCr digital video Standards DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4 Video input and loop-through Number/signal type 1 single link HDMI (or DVI-D or DisplayPort) input
1 single link HDMI (or DVI-D) loop-throughConnectors 2 female HDMI type A: 1 input, 1 loop-through Optical fiber interconnection between transmitter and receiver Number/signal type 1 set of proprietary signals Connectors 1 LC fiber connector Operating distance NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks. Singlemode 10 km (6.21 miles) with singlemode cable Multimode 400 m (1312') with 50 µm OM3 2000 MHz bandwidth laser optimzed multimode cable
700 m (2297') with 50 µm OM4 4700 MHz bandwidth laser optimzed multimode cableNOTE Multimode units are compatible with OM1 and OM2 multimode cables, but at reduced operating distances. Nominal peak wavelength Singlemode 1490 nm, 1550 nm, 1310 nm Multimode 850 nm, 980 nm, 780 nm Data rate 8.5 Gbps Transmission power Singlemode -6 dBm, typical Multimode -5 dBm, typical Maximum receiver sensitivity Singlemode -15 dBm, typical Multimode -13 dBm, typical Optical loss budget Singlemode 9 dB, maximum Multimode 8 dB, maximum Audio Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±0.5 dB THD + Noise <0.1%, 20 Hz - 20 kHz at nominal level S/N >90 dB, at maximum balanced output (unweighted) Crosstalk ?-80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz Sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz Bit depths 16, 20, 24 bit Audio input Number/signal type 1 analog stereo, balanced/unbalanced or
1 digital audio, de-embedded from HDMIConnectors (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video input)Source formats LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, analog stereo Impedance 10k ohms, unbalanced, 20k ohms balanced Nominal level +4 dBu (1.23 mVrms) balanced, -10 dBV (316 mVrms) unbalanced Maximum level +21 dBu balanced, +15 dBu unbalanced Input gain adjustment -18 dB to +24 dB, 1 dB steps, adjustable NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Communications — transmitter USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)Communications — external device (pass-through, unidirectional or bidirectional) Serial control pass-through port RS-232 (+5 V) via a (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles)
(connector is shared with the IR control port)Baud rates Up to 115200 baud Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, noneSerial control pin configuration 1 = Tx, 2 = Rx, 3 = GND IR control port (1) 3.5 mm, captive screw connector, 5 pole (uses 3 poles)
(connector is shared with the RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHzIR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx Ethernet pass-through port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, full duplex with autodetect General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Device 8.1 watts Device and power supply 10 watts Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, vents Thermal dissipation Device 26.2 BTU/hr Device and power supply 32.8 BTU/hr Mounting Rack mount Yes, with optional 1U high rack shelf Furniture mount Yes, with optional under-desk mounting kit Enclosure type Metal Enclosure dimensions 1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)Product weight 1.6 lbs (0.7 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance CE, c-UL, UL, IEC 60825-1, C-tick, FCC Class A, ICES, VCCI
Complies with the appropriate requirements of RoHS and WEEE.Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4442-D8) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1276-11 10,2 cm 27,2 cm 23,5 cm 1,26 kg 60-1276-12 10,2 cm 27,2 cm 23,5 cm 1,26 kg