XTP R HD 4K
EUR
1128.00
€ 1128.00
Hersteller
Extron
Art.Nr.
60-1524-13
EAN
60-1524-13
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- Empfängt Video mit Embedded Audio, bidirektionale RS?232- und IR? sowie Ethernet-Signale bis zu 100 m über ein geschirmtes CATx-Kabel
- Unterstützt Computer- und Videoauflösungen bis zu 4K
- Bidirektionale RS?232- und IR?Einspeisung zur AV?Gerätesteuerung
- HDCP 2.2-konform
- Möglichkeit zur Fernspeisung
- Es wird ausdrücklich geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron für eine optimale Leistung empfohlen
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
XTP R HD 4K | Empfänger für HDMI | 60-1524-13 |
Technische Daten
Technische Daten
-
XTP R HD 4K specification Frame rate 1 24, 25, 30, 50, or 60 fps Chroma sampling 1 4:4:4, 4:2:2, or 4:2:0 Color bit depth 1 8 bits per color Signal type DisplayPort 1.1, DVI 1.0, HDMI 1.4, HDCP 2.2 Max. video data rate 10.2 Gbps (3.4 Gbps per color) NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate. NOTE The XTP R HD 4K receiver can be used with other Extron XTP products, with twisted pair cables connecting the units. Video Gain Unity Resolution range Up to 2560x1600 @ 60 Hz* or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
* reduced blankingSignal type Single-link HDMI (or DVI-D or DisplayPort) Maximum data rate 10.2 Gbps (3.4 Gbps per color) Maximum pixel clock 300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling) Formats RGB and YCbCr digital video Standards DisplayPort 1.1, DVI 1.0, HDMI 1.4; HDCP 2.2 Interconnection between transmitter and receiver Connectors 1 female RJ-45 per unit Termination standards TIA/EIA T568B Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (Shielded Twisted Pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance. Video output Number/signal type 1 single link HDMI (or DVI-D) Connectors 1 female HDMI type A Audio Gain Unbalanced output: 0 dB; balanced output: +6 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise <0.1% @ 20 Hz - 20 kHz at nominal level S/N >90 dB, at maximum balanced output (unweighted) Crosstalk ?-80 dB @ 1 kHz, fully loaded Stereo channel separation >80 dB @ 1 kHz Sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz Bit depths 16, 20, 24 bit Audio output Number/signal type 1 analog stereo (2-channel), balanced/unbalanced
1 digital audio, embedded with HDMI output
1 digital audio via S/PDIF output connectorConnectors (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack (tip, ring)Supported formats HDMI LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos®, Dolby® TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel S/PDIF LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel Analog Analog stereo audio Impedance Analog 50 ohms unbalanced, 100 ohms balanced Digital 75 ohms (for S/PDIF output) Maximum level (Hi-Z) >+12 dBV balanced; +6 dBV unbalanced Gain error ±0.5 dB channel to channel Volume control range -100 dB to 0 dB (control 0 to 100 in 1 dB steps) NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64. NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Communications — receiver USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)Communications — external device (pass-through, unidirectional or bidirectional) Serial control port input/output 1 set of proprietary signals on a female RJ-45 jack Serial control port output/input RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port) Baud rates Up to 115200 baud Protocol Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, noneSerial control pin configuration 1 = Tx, 2 = Rx, 3 = Gnd IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHzIR control pin configuration 3 = Gnd, 4 = IR Tx, 5 = IR Rx Ethernet pass-through port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, half/full duplex with autodetect Relay number/type 2 normally open relays Relay control connectors (1) 3.5 mm captive screw connectors, 4 pole Relay control contact rating 24 V, 1 A General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Device 9.1 watts, 12 VDC Device and power supply 11.3 watts, 12 VDC NOTE The XTP receiver can be powered either locally by an external power supply or remotely using an optional power injector or XTP CrossPoint matrix switcher. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensingCooling Convection, vents on sides and top Thermal dissipation Device 30.0 BTU/hr Device and power supply 37.6 BTU/hr Mounting Rack mount Yes, with optional 1U high rack shelf Furniture mount Yes, with optional under-desk mounting kit Enclosure type Metal Enclosure dimensions 1.0" H x 8.68" W x 6.0" D (half rack wide)
(2.5 cm H x 22.1 cm W x 15.2 cm D)
(Depth excludes connectors.)Product weight 1.6 lbs (0.7 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance Safety CE, c-UL, UL EMI/EMC CE**, C-tick, FCC Class A**, ICES, VCCI Environmental Complies with the appropriate requirements of RoHS, WEEE. NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (3838-120216-D2)