XTP R HWP 201 4K

€ 2136.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1629-22
EAN
60-1629-22
Gewicht
1 kg

Produktbeschreibung

Hauptmerkmale

  • Besonders flaches Wandanschlussfeld mit minimalem Platzbedarf hinter einem Flachbildschirm
  • Empfängt Video mit Embedded Audio, bidirektionale RS?232- und IR? sowie Ethernet-Signale bis zu 100 m über ein geschirmtes CATx-Kabel
  • Unterstützt Computer- und Videoauflösungen bis zu 4K
  • HDCP 2.2-konform
  • Möglichkeit zur Fernspeisung
  • Für optimale Leistung wird ausdrücklich das geschirmte XTP DTP 24-Twisted Pair-Kabel von Extron empfohlen
Modell Beschreibung der Version Teilenummer
XTP R HWP 201 4K HDMI-Empfänger - Decorator-Format - Schwarz 60-1629-22
XTP R HWP 201 4K HDMI-Empfänger - Decorator-Format - Weiß 60-1629-23

Technische Daten

Technische Daten

XTP R HWP 201 4K
specification
   
    Frame rate 1  24, 25, 30, 50, or 60 fps
    Chroma sampling 1  4:4:4, 4:2:2, or 4:2:0
    Color bit depth 1  8 bits per color
    Signal type  DisplayPort 1.1, DVI 1.0, HDMI 2.0, HDCP 2.2
    Max. video data rate  10.2 Gbps (3.4 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
     
 NOTE     The XTP R HWP 201 4K receiver can be used with other Extron XTP products, with twisted pair cables linking the units.
Video
    Gain  Unity
    Resolution range  Up to 2560x1600 @ 60 Hz* or
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz,
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
* reduced blanking
    Signal type  Single-link HDMI (or DVI-D or DisplayPort)
    Maximum data rate  10.2 Gbps (3.4 Gbps per color)
    Maximum pixel clock  300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)
    Formats  RGB and YCbCr digital video
    Standards  DisplayPort 1.1, DVI 1.0, HDMI 2.0; HDCP 2.2
Shielded twisted pair interconnection
    Connectors  1 female RJ-45 per unit
    Termination standards  TIA/EIA T568B
    XTP signal 
       Signal transmission distance  330' (100 m) using shielded twisted pair or XTP DTP 24 cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth, STP (Shielded Twisted Pair)
       NOTE     Extron XTP DTP 24 shielded twisted pair cable is stongly recommended for optimal performance.
Video output
    Number/signal type  1 single link HDMI (or DVI-D)
    Connectors  1 female HDMI type A
Audio
    Gain  Unbalanced output: 0 dB; balanced output: +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.05 dB
    THD + Noise  <0.1% @ 20 Hz - 20 kHz at nominal level
    S/N  >90 dB, at maximum balanced output (unweighted)
    Crosstalk  ?-80 dB @ 1 kHz, fully loaded
    Stereo channel separation  >80 dB @ 1 kHz
    Sampling rates  32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
    Bit depths  16, 20, 24 bit
Audio output
    Number/signal type  1 analog stereo (2-channel), balanced/unbalanced
1 digital audio, embedded with HDMI output
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
    Supported formats 
       HDMI  LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos®, Dolby® TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
       Analog  Analog stereo audio
    Impedance  50 ohms unbalanced, 100 ohms balanced
    Maximum level (Hi-Z)  >+12 dBV balanced; +6 dBV unbalanced
    Gain error  ±0.5 dB channel to channel
    Volume control range  -100 dB to 0 dB (control 0 to 100 in 1 dB steps)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Communications — receiver
    USB control ports  1 front panel female mini USB B
    USB standards  USB 2.0, low speed
    Program control  Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Communications — external device (pass-through, unidirectional or bidirectional)
    Serial control port input/output  1 set of proprietary signals on a female RJ-45 jack
    Serial control port output/input  RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
    Baud rates  Up to 115200 baud
    Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = GND
    IR control port  (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
    IR control pin configuration  3 = GND, 4 = IR Tx, 5 = IR Rx
    Ethernet pass-through port  1 female RJ-45 connector
    Ethernet data rate  10/100Base-T, half/full duplex with autodetect
General
    Power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Device  TBD
       Device and power supply  TBD
    NOTE     Each XTP receiver can be powered either locally by an external power supply or remotely using an optional power injector.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
    Cooling  Convection, vents on bottom and top
    Thermal dissipation 
       Device  TBD
       Device and power supply  TBD
   Mounting
       Furniture or wall mount  Wall or furniture mount in a decorator-style opening.
    Enclosure type  Metal
    Enclosure dimensions 
       Faceplate  Two (2.6" H x 1.3" W x 0.9" D
[6.6 cm H x 3.3 cm W x 2.3 cm D])
       Device  2.8" H x 3.7" W x 1.9" D
(7.2 cm H x 9.4 cm W x 4.9 cm D)
(Depth excludes connectors. Fits some 2-gang boxes.)
    Product weight  0.8 lbs (0.4 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance  CE**, c-UL, UL, C-tick, FCC Class A**, ICES, VCCI
UL rated for use in plenum airspaces, excluding the power supply.
Complies with the appropriate requirements of RoHS and WEEE.
    NOTE     **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4443-D4)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1629-22 8,9 cm 24,1 cm 18,1 cm 1,06 kg
    60-1629-23 8,9 cm 24,1 cm 18,1 cm 1,06 kg