XTP SFR HD 4K

€ 2256.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1278-21
EAN
60-1278-21
Gewicht
1 kg

Produktbeschreibung

Hauptmerkmale

  • Empfängt Video mit Embedded Audio, bidirektionale RS?232- und IR-Steuerungssignale sowie Ethernet über ein Glasfaserkabel
  • Fortschrittliche Extron Vector™ 4K-Skalierungstechnologie
  • Auswählbare Ausgangsauflösungen von 640x480 bis 3840x2160
  • HDCP-konform
  • Bidirektionale RS?232- und IR-Einspeisung zur AV-Gerätesteuerung
  • Ethernet-Erweiterung
Modell Beschreibung der Version Teilenummer
XTP SFR HD 4K MM HDMI-Empfänger mit Skalierer - Multimode 60-1278-21
XTP SFR HD 4K SM HDMI-Empfänger mit Skalierer - Singlemode 60-1278-22

Technische Daten

Technische Daten

XTP SFR HD 4K
specification
   
    Frame rate 1  24, 25, 30, 50, or 60 fps
    Chroma sampling 1  4:4:4, 4:2:2, or 4:2:0
    Color bit depth 1  8 bits per color
    Signal type  DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4
    Max. video data rate  8.91 Gbps (2.97 Gbps per color)
    NOTE     1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.
     
 NOTE     The XTP SFR HD 4K scaling receiver can be used with XTP transmitters, with a fiber optic cable linking the transmitter and receiver, or with other Extron XTP products.
 NOTE     These receivers are class 1 laser products. They meet the safety regulations of IEC 60825-1.
Video
    Gain  Unity
    Resolution range  Up to 2560x1600 @ 60 Hz* or
4K (4096x2160) @ 24 Hz, UHD (3840x2160) @ 30 Hz,
UHD @ 60 Hz with 4:2:0 chroma subsampling**
* reduced blanking
** bypass mode only
    Signal type  Single-link HDMI (or DVI-D or DisplayPort)
    Color bit depth  8, 10, or 12 bits — subject to the maximum data rate limit
    Maximum data rate  8.91 Gbps (2.97 Gbps per color)
    Maximum pixel clock  300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)
    Formats  RGB and YCbCr digital video
    Standards  DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4
Optical fiber interconnection between transmitter and receiver
    Number/signal type  1 set of proprietary signals
    Connectors  1 LC fiber connector
    Operating distance 
       NOTE     Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
       Singlemode  10 km (6.21 miles) with singlemode cable
       Multimode  400 m (1312') with 50 µm OM3 2000 MHz bandwidth laser optimzed multimode cable
700 m (2297') with 50 µm OM4 4700 MHz bandwidth laser optimzed multimode cable
       NOTE     Multimode units are compatible with OM1 and OM2 multimode cables, but at reduced operating distances.
    Nominal peak wavelength 
       Singlemode  1490 nm, 1550 nm, 1310 nm
       Multimode  850 nm, 980 nm, 780 nm
    Data rate  8.5 Gbps
    Transmission power 
       Singlemode  -6 dBm, typical
       Multimode  -5 dBm, typical
    Maximum receiver sensitivity 
       Singlemode  -15 dBm, typical
       Multimode  -13 dBm, typical
    Optical loss budget 
       Singlemode  9 dB, maximum
       Multimode  8 dB, maximum
Video processing
    Digital sampling  24 bit, 8 bits per color, 297 MHz standard
    Colors  16.78 million
Video output
    Number/signal type  1 single link HDMI (or DVI-D)
    Connectors  1 female HDMI type A
    Scaled resolutions  640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, 1280x10248, 1360x7688, 1366x7688, 1400x10508, 1440x9008, 1600x9008, 1600x12008, 1680x10508, 1920x12008, 2048x12008, 2048x15368, 2560x10808, 2560x14408, 2560x16008, bypass*
HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 1920x21601,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8, 2048x21601,2,3,4,5,6,7,8, 3840x21601,2,3,4,5, bypass*
1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz.
    NOTE     * When the output resolution is set to "bypass," the input signal is output without being scaled.
Audio
    Gain  Unbalanced output: 0 dB; balanced output: +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.5 dB
    THD + Noise  <0.1%, 20 Hz - 20 kHz at nominal level
    S/N  >90 dB, at maximum balanced output (unweighted)
    Crosstalk  ?-80 dB @ 1 kHz, fully loaded
    Stereo channel separation  >80 dB @ 1 kHz
    Sampling rates  32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
    Bit depths  16, 20, 24 bit
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Audio output
    Number/signal type  1 analog stereo, balanced/unbalanced
1 digital audio, embedded with HDMI output
1 digital audio via S/PDIF output connector
    Connectors  (1) 3.5 mm captive screw connector, 5 pole
1 female HDMI type A (shared with video output)
1 female RCA jack (tip, ring)
    Supported formats 
       HDMI  LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1
       S/PDIF  2-channel LPCM up to 48 kHz, Dolby® Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1
       Analog  Analog stereo
    Impedance 
       Analog  50 ohms unbalanced, 100 ohms balanced
       S/PDIF  75 ohms
    Maximum level (Hi-Z)  >+12 dBV balanced; +6 dBV unblanced
    Gain error  ±0.5 dB channel to channel
    Volume control  -100 dB to 0 dB (control 0 to 100 in 1 dB steps)
    NOTE     Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
Communications — receiver
    Serial control port  1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole
    Baud rate and protocol  9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    USB control ports  1 front panel female mini USB B
    USB standards  USB 2.0, low speed
    Program control  Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Communications — external device (pass-through, unidirectional or bidirectional)
    Serial control pass-through port  RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles)
(connector is shared with the IR control port)
    Baud rates  Up to 115200 baud
    Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    IR control port  (1) 3.5 mm, captive screw connector, 5 pole (uses 3 poles)
(connector is shared with the RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz
    IR control pin configuration  3 = Gnd, 4 = IR Tx, 5 = IR Rx
    Ethernet pass-through port  1 female RJ-45 connector
    Ethernet data rate  10/100Base-T, full duplex with autodetect
    Relay number/type  2 normally open relays
    Relay control connectors  (1) 3.5 mm captive screw connectors, 4 pole
    Relay control contact rating  24 V, 1 A
General
    External power supply  External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Device  7.6 watts
       Device and power supply  9.4 watts
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  24.6 BTU/hr
       Device and power supply  30.8 BTU/hr
   Mounting
       Rack mount  Yes, with optional 1U rack shelf
       Furniture mount  Yes, with optional under-desk mounting kit
       Pole mount  Attachable to a projector mount pole with optional PMK 350 kit
    Enclosure type  Metal
    Enclosure dimensions  1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
    Product weight  1.6 lbs (0.7 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance  CE, c-UL, UL, IEC 60825-1, C-tick, FCC Class A, ICES, VCCI
Complies with the appropriate requirements of RoHS and WEEE.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4446-D11)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1278-21 10,2 cm 27,2 cm 23,5 cm 1,27 kg
    60-1278-22 10,2 cm 27,2 cm 23,5 cm 1,27 kg