XTP T USW 103

€ 2256.00

  • inkl. 20 % USt zzgl. Versandkosten
    zurzeit nicht lagernd:
    Lieferzeit 5-7 Tage*

    *Alle Lieferzeiten sind ungefähre Angaben und können von der tatsächlichen Lieferzeit abweichen!

Hersteller
Extron
Art.Nr.
60-1198-01
EAN
60-1198-01
Gewicht
1 kg

Produktbeschreibung

Hauptmerkmale

  • Überträgt HDMI- oder digitalisierte, analoge Video-, Audio-, bidirektionale RS?232?, IR? und Ethernet-Signale bis zu 100 m über ein geschirmtes CATx-Kabel
  • HDCP-konform
  • Unterstützt Computer- und Videoauflösungen bis zu 1920x1200, einschließlich 1080p/60 Deep Color und 2K
  • Möglichkeit zur Fernspeisung
  • Für optimale Leistung wird nachdrücklich ein geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron empfohlen
  • Kompatibel mit geschirmtem CATx-Twisted Pair-Kabel
Modell Beschreibung der Version Teilenummer
XTP T USW 103 Sender für 2 HDMI und VGA 60-1198-01

Technische Daten

Technische Daten

XTP T USW 103
 NOTE     The XTP switcher can be used with other Extron XTP products, with twisted pair cables connecting the units.
 NOTE     *Appropriate DVI-D to HDMI or DisplayPort to HDMI cables or adapters are required for DVI or DisplayPort signal input.
Video
    Gain  Unity
    Resolution range 
       Digital  Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blanking
       Analog  Up to 1920x1200* or 1080p (HDTV)
* reduced blanking
    Signal type  Single-link HDMI (or DVI-D*)
       Digital video  RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1900x1200 @ 60 Hz)
       EDID and DDC  Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards.  EDID and DDC signals are actively buffered.
       HDCP  Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
       HPD  Supports hot plug detection (HPD) of display as a pass-through signal.
    Maximum data rate  6.75 Gbps (2.25 Gbps per color)
    Maximum pixel clock  165 MHz
    Formats  RGB and YCbCr digital video
    Standards  DVI 1.0, HDMI, HDCP 1.1
Video input
    Number/signal type  1 analog RGBHV
2 single link HDMI (DVI-D or DisplayPort*) input
    Connectors  1 female 15-pin HD
2 female HDMI type A
    Nominal level  0.7 Vp-p for RGB
    Minimum/maximum levels  0.3 V to 1.45 V p-p
    Impedance  75 ohms
    Horizontal frequency  30 kHz to 100 kHz
    Vertical frequency  24 Hz to 120 Hz
Interconnection between transmitter and receiver
    Connectors  1 female RJ-45 per unit
    Termination standards  TIA/EIA T568B
    Signal transmission distance  330' (100 m) using shielded twisted pair or XTP DTP 24 cable
       Cable requirements  Solid conductor, 24 AWG or better
       Cable recommendations  400 MHz bandwidth, STP (Shielded Twisted Pair)
    NOTE     Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.
Audio
    Gain 
       Range  Adjustable, -18 dB to +18 dB
       Default  Unbalanced output: 0 dB; balanced output +6 dB
    Frequency response  20 Hz to 20 kHz, ±0.05 dB
    THD + Noise  0.01% @ 1 kHz at nominal level
    S/N  >90 dB, at maximum output, balanced (unweighted)
    Crosstalk  <-45 dB @ 20 kHz, -72 dB @ 1 kHz or below
    Stereo channel separation  >80 dB @ 20 Hz to 20 kHz
    Sampling rates  32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
    Bit depths  16, 20, 24 bit
Audio input
    Number/signal type  1 analog stereo, unbalanced or
2 digital audio, embedded from HDMI
    Connectors  1 female 3.5 mm mini audio jack
2 female HDMI type A (shared with video input)
    Source formats  LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
    Impedance  >10k ohms, unbalanced, DC coupled
    Nominal level  +4 dBu (1.23 mVrms) balanced or -10 dBV (316 mVrms) unbalanced
    Maximum level  +7 dBv unbalanced
    NOTE     0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu
Communications — switcher
    Serial control port  1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole
    Baud rate and protocol  9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    USB control ports  1 front panel female mini USB B
    USB standards  USB 2.0, low speed
    Contact closure  (1) 3.5 mm captive screw connector, 4 pole
    Contact closure pin configuration  1 = input 1, 2 = input 2, 3 = input 3, 4 = GND
    Program control  Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
Communications — external device (pass-through, unidirectional or bidirectional)
    Serial control port input/output  RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
    Serial control port output/input  1 set of proprietary signals on a female RJ-45 jack
    Baud rates  Up to 115200 baud
    Protocol  Data bits = 5 - 8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, none
    Serial control pin configuration  1 = Tx, 2 = Rx, 3 = Gnd
    Ethernet pass-through port  1 female RJ-45 connector
    Ethernet data rate  10/100Base-T, half/full duplex with autodetect
    IR control port  (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port)
TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
    IR control pin configuration  3 = GND, 4 = IR Tx, 5 = IR Rx
General
    Power supply  External
Input: 100 to 240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
    Power consumption 
       Device  9.3 watts, 12 VDC
       Device and power supply  11.3 watts, 100-240 VAC, 50-60 Hz
    NOTE     Each XTP switcher, transmitter, receiver can be powered either locally by an external power supply or remotely using an optional power injector.
    Temperature/humidity  Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
    Cooling  Convection, no vents
    Thermal dissipation 
       Device  29.4 BTU/hr
       Device and power supply  36.3 BTU/hr
   Mounting
       Rack mount  Yes, with optional 1U high rack shelf
Back of the rack mountable with optional back-of-the-rack mounting kit
       Furniture mount  Yes, with optional under-desk mounting kit
    Enclosure type  Metal
    Enclosure dimensions  1.0" H x 8.75" W x 6.0" D (half rack wide)
(2.5 cm H x 22.2 cm W x 15.2 cm D)
(Depth excludes connectors.)
    Product weight  1.6 lbs (0.7 kg)
    Shipping weight  4 lbs (2 kg)
    Vibration  ISTA 1A in carton (International Safe Transit Association)
    Regulatory compliance  CE**, c-UL, UL, C-tick, FCC Class A**, ICES, KCC, VCCI
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
Complies with the appropriate requirements of RoHS and WEEE.
    NOTE     **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
    Product warranty  3 years parts and labor
    Everlast power supply warranty  7 years parts and labor
    NOTE     All nominal levels are at ±10%.
    NOTE     Specifications are subject to change without notice.
(4451-D13)
Versand-Abmessung und -Gewicht
    Teilenummer Höhe Breite Tiefe Gewicht
    60-1198-01 12,1 cm 28,1 cm 24,5 cm 1,27 kg