XTP T UWP 202
EUR
1752.00
€ 1752.00
Hersteller
Extron
Art.Nr.
60-1216-13
EAN
60-1216-13
Gewicht
1 kg
Produktbeschreibung
Hauptmerkmale
- Überträgt HDMI- oder analoge Video-, Audio- sowie bidirektionale RS?232? und IR?Signale bis zu 100 m über ein geschirmtes CATx-Kabel
- Unterstützt Computer- und Videoauflösungen bis zu 1920x1200, einschließlich 1080p/60 Deep Color und 2K
- HDCP-konform
- Möglichkeit zur Fernspeisung
- Bidirektionale RS?232? und IR?Einspeisung zur AV?Gerätesteuerung
- Für optimale Leistung wird nachdrücklich ein geschirmtes XTP DTP 24-Twisted Pair-Kabel von Extron empfohlen
Modell | Beschreibung der Version | Teilenummer | |
---|---|---|---|
XTP T UWP 202 | HDMI & VGA-Sender – Decorator-Format – Schwarz | 60-1216-12 | |
XTP T UWP 202 | HDMI & VGA-Sender – Decorator-Format – Weiß | 60-1216-13 | |
XTP T UWP 202 NL | HDMI & VGA-Sender – Decorator-Format - Ohne LAN – Schwarz | 60-1410-12 | |
XTP T UWP 202 NL | HDMI & VGA-Sender – Decorator-Format - Ohne LAN – Weiß | 60-1410-13 |
Technische Daten
Technische Daten
-
XTP T UWP 202 NOTE The XTP transmitter can be used with other Extron XTP products, with twisted pair cables connecting the units. NOTE *Appropriate DVI-D to HDMI cables or adapters are required for DVI signal input. Video Gain Unity Resolution range Digital Up to 1920x1200*, 2K, or 1080p (HDTV)
* reduced blankingAnalog Up to 1920x1200* or 1080p (HDTV)
* reduced blankingSignal type Single-link HDMI (or DVI-D*) Digital video RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1900x1200 @ 60 Hz) EDID and DDC Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered. HDCP Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards HPD Supports hot plug detection (HPD) of display as a pass-through signal. Maximum data rate 6.75 Gbps (2.25 Gbps per color) Maximum pixel clock 165 MHz Formats RGB and YCbCr digital video Standards DVI 1.0, HDMI, HDCP 1.1 Video input Number/signal type 1 analog RGBHV
1 single link HDMI (DVI-D or DisplayPort*) inputConnectors 1 female 15-pin HD
1 female HDMI type ANominal level 0.7 Vp-p for RGB Minimum/maximum levels 0.3 V to 1.45 V p-p Impedance 75 ohms Horizontal frequency 30 kHz to 100 kHz Vertical frequency 24 Hz to 120 Hz Interconnection between transmitter and receiver Connectors 1 female RJ-45 per unit Termination standards TIA/EIA T568B Signal transmission distance 330' (100 m) using shielded twisted pair or XTP DTP 24 cable Cable requirements Solid conductor, 24 AWG or better Cable recommendations 400 MHz bandwidth, STP (Shielded Twisted Pair) NOTE Extron XTP DTP 24 shielded twisted pair cable is stongly recommended for optimal performance. Audio Gain Range -18 dB to +24 dB Default Unbalanced output: 0 dB; balanced output +6 dB Frequency response 20 Hz to 20 kHz, ±0.05 dB THD + Noise 0.01% @ 1 kHz at nominal level S/N >90 dB, at maximum output, balanced (unweighted) Crosstalk <-45 dB @ 20 kHz, -72 dB @ 1 kHz or below Stereo channel separation >80 dB @ 20 Hz to 20 kHz Sampling rates 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz Bit depths 16, 20, 24 bit Audio input Number/signal type 1 analog stereo, unbalanced or
1 digital audio, de-embedded from HDMIConnectors 1 female 3.5 mm mini stereo jack
1 female HDMI type A (shared with video input)Source formats LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, DOlby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel Impedance >10k ohms unbalanced, DC coupled Nominal level +4 dBu (1.23 mVrms) balanced or -10 dBV (316 mVrms) unbalanced Maximum level +7 dBv unbalanced NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ? 2 dBu Communications — transmitter Serial control port 1 bidirectional RS-232: 1 rear panel 3.5 mm captive screw connector, 3 pole Baud rate and protocol 9600 (default) to 115200 baud, 8 data bits, 1 stop bit, no parity Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND USB control ports 1 front panel female mini USB B USB standards USB 2.0, low speed Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)Communications — external device (pass-through, unidirectional or bidirectional) Serial control port input/output RS-232 (±5 V) via (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with IR control port) Serial control port output/input 1 set of proprietary signals on a female RJ-45 jack Baud rates Up to 115200 baud Protocol Data bits = 5-8
Stop bits = 1 or 2
Parity = odd, even, none
Flow control = XON, XOFF, noneSerial control pin configuration 1 = Tx, 2 = Rx, 3 = GND Ethernet pass-through port 1 female RJ-45 connector Ethernet data rate 10/100Base-T, half/full duplex with autodetect NOTE Ethernet pass-through port is optional and not available for No-LAN models. IR control port (1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz IR control pin configuration 3 = GND, 4 = IR Tx, 5 = IR Rx General Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 wattsPower consumption Device 9.8 watts, 12 VDC Device and power supply 12.2 watts, 12 VDC NOTE Each XTP transmitter or receiver can be powered either locally by an external power supply or remotely using an optional power injector. Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensingCooling Convection, no vents Thermal dissipation Device 32.2 BTU/hr Device and power supply 40.2 BTU/hr Mounting Furniture or wall mount Wall or furniture mount in a decorator-style opening. Enclosure type Metal Enclosure dimensions Faceplate Two (2.6" H* x 1.3" W x 0.3" D
[6.6 cm H* x 3.3 cm W x 0.8 cm D])Device 2.8" H* x 3.7" W x 1.9" D
(7.1 cm H* x 9.4 cm W x 4.8 cm D)
(Depth excludes connectors. Fits some 2-gang boxes.)
*Height is 4.1" (10.4 cm) including mounting tabs.Product weight 0.6 lbs (0.3 kg) Vibration ISTA 1A in carton (International Safe Transit Association) Regulatory compliance CE**, c-UL, UL, C-tick, FCC Class A**, ICES, VCCI
Complies with the appropriate requirements of RoHS and WEEE.NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable. Product warranty 3 years parts and labor Everlast power supply warranty 7 years parts and labor NOTE All nominal levels are at ±10%. NOTE Specifications are subject to change without notice. (4453-D15) Versand-Abmessung und -Gewicht Teilenummer Höhe Breite Tiefe Gewicht 60-1216-12 7,5 cm 26,7 cm 19,1 cm 1,07 kg 60-1216-13 7,5 cm 26,7 cm 19,1 cm 1,07 kg 60-1410-12 7,5 cm 26,7 cm 19,1 cm 1,06 kg 60-1410-13 7,5 cm 26,7 cm 19,1 cm 1,06 kg