IPCP Pro PCS1

Technische Daten

IPCP Pro PCS1
Memory
SDRAM	512 MB
Flash	4.5 GB
Software and control options
Software	Extron Global Configurator® Plus and Professional for Windows®, Global Scripter®
Control options	GlobalViewer Enterprise®, Extron Control, TouchLink® Pro touchpanels, or eBUS® button panels
Ethernet control
Network interface controllers (NICs)	1
Connector	1 female RJ-45 connector
Data rate	10/100/1000Base-T, half/full duplex with autodetect
Protocols	DHCP, DNS, HTTP, HTTPS, ICMP, NTP, SFTP, SMTP, SNMP, SSH, TCP/IP, UDP/IP
Default settings	Link speed and duplex level = autodetected IP address = 192.168.254.250 Subnet mask = 255.255.255.0 Gateway = 0.0.0.0 DHCP = off DNS: 127.0.0.1
Serial control
Quantity/type	1 bidirectional RS-232
Connector	(1) 3.5 mm captive screw connector, 3 pole
Baud rate and protocol	300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity
NOTE     The 3-pole port supports software flow control. The default is no flow control.
Pin configurations
Serial, 3-pole captive screw	Pin 1 = Tx, 2 = Rx, 3 = Gnd
Digital I/O control
Quantity/type	3 digital input/output (configurable)
Connectors	(1) 3.5 mm captive screw connector, 4 pole
Digital inputs
Input voltage range	0 to 24 VDC, clamped at +30 VDC
Input impedance	>10k ohms
Programmable pullup	1k ohms to +5 VDC
Upper threshold	>2.8 VDC
Lower threshold	<2.0 VDC
Digital outputs	250 mA sink from 24 VDC max.
Pin configurations	1, 2, 3 = digital I/Os 1, 2, 3; 4 = Gnd
IR/serial control
Quantity/type	1 programmable: unidirectional RS-232 (±5 V), or TTL level (0 to 5 V) infrared (carrier and non-carrier) up to 300 kHz
Connector	(1) 3.5 mm captive screw connector, 2-pole
Baud rate and protocol (RS-232)	300 to 115200 baud (9600 baud = default); 8 (default) or 7 data bits; 1 (default) or 2 stop bits; no parity (default), even, or odd parity
Pin configurations	For each port, pin 1 = signal, 2 = Gnd
IR output carrier frequency	30 kHz to 300 kHz
eBUS control
eBUS control ports	(1) 3.5 mm captive screw connector, 4 pole
eBUS pin configuration	+V = +12 VDC; +S = + signal; -S = - signal; G = ground
Recommended cable type	Extron STP20-2/1000 or STP20-2P/1000 cable
Maximum system cable length	1000 feet (305 meters) sum total for the eBUS system, regardless of topology. Power injection may be required depending on system cabling topology and primary power supply wattage. See the eBUS Technology Reference Guide for details.
eBUS power output	6 watts
Switched AC power output
Connectors
Input	1 male IEC power connector, 6" (152 mm)
Output	1 female IEC power connector, 6" (152 mm)
NOTE     1 male IEC to female Edison adapter is included.
Voltage	100-240 VAC, 50-60 Hz
Maximum AC load	10 A, TBD watts at 120 VAC 10 A, TBD watts at 220 VAC
Current sense
Range	0 A to 10 A
Resolution	100 mA
Tolerance	TBD
General
Power supply	Internal Input: 100-240 VAC, 50-60 Hz
Power consumption	TBD
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, no vents
Thermal dissipation	TBD
Mounting
Rack mount	Yes, with optional 1U rack shelf
Furniture mount	Yes, with optional bracket kit
Enclosure type	Metal
Enclosure dimensions	1.7" H x 4.3" W x 8.0" D (1U high, quarter rack wide) (43 mm H x 109 mm W x 203 mm D) (Depth excludes connectors.)
Product weight	TBD
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL
EMI/EMC	CE, C-Tick, FCC Class A, ICES, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE
Product warranty	3 years parts and labor
NOTE     All nominal levels are at ±10%.
NOTE     Specifications are subject to change without notice.
(4196-D1-012518)